Search results

Sorry about that. I am not sure why I didn't say what headphones I was using. Headphone wise, at the time I had the Alessandro MS2i. Speaker wise I was using Onix Reference I mkII and a UFW-10 subwoofer. The Alessandro's are very easy to drive from what I understand, so that could be why I...

Right now I have a X-Fi Elite Pro. I bought a Benchmark DAC1 USB last year to try out and I have to say, I did not hear much of any difference at all when compared to my setup now. In this case I was using X-Fi Elite Pro -> Panasonic XR-50 -> Headphones I ended up returning the DAC1 because I...

Anyone have a XBOX360 and can post some pictures of how it looks on this monitor? :confused: :cool:

So then hooking them up to a receiver is a bad idea for sound quality, or it just doesn't work? If I remember right, theres only a few highly regarded manufacturers, and I dont recall Alesis being one of them. It seems most everyone agrees Genelec is one of the best, so I would like to stick...

Yeah I know... so that means I would hook them up directly to the soundcard? How would I control volume? I sure don't trust the software volume control that comes with my soundcard software, and having to adjust each speaker manually wont be too cool either... And what if I want to play xbox...

Well right now I have a pretty nice sound system. Panasonic XR50 receiver, and Onix Ref 1s with UFW-10 sub. Emu 1212m soundcard. However, I was thinking about switching it up with some studio monitors. My room is small 11x10 or so I believe.. and my Ref1s are just sitting on my computer...

I have a 6800GT and I play WoW at 1920x1200 with everything turned up. It is mostly fast enough, but a few spots in cities and such will slow it down to 17-20fps. I am looking at replacing it with a X800XTPE or X850XTPE... or just wait it out for the new cards. Have not decided quite yet.

I run my 6800GT at 1920x1200 no problem.

I'm curious about this too. Although I have a HP 2335 (23" 1920x1200) monitor. Right now I have a 6800GT, but just today the DVI connector seemed to have went bad. I am thinking about moving it to one of my other computers and just use it analog and buy something new. I play a lot of...

Haha, I just got it and it doesn't support widescreen. Redicilous. Hell, even WoW supports 1920x1200, why can't this game? :mad: I guess that was a waste of 50 bucks. Pfft.

Maybe that's my problem, I burned myself out on it for a bit. I started in the stress test (PVP server)..and got 1st horde rogue on my server competition to get into closed beta. After that constant leveling.. ugh. I began to hate the "bring me 30 feathers" .. quests... and then you gotta kill...

I'm in the beta, and honestly, I would say if you didn't like MMORPGS before, this one won't change your opinion much. It starts getting really repetitive with the exact same type of quests from level 1 all the way to 50+ I had a blast, until around level 40. Now that I'm 45 I have no...

Interesting! Good luck on your replacement monitor... I still have not sent mine in, even though I probably should. I love the monitor though, I can't imagine having to go back to a 17" CRT, even if it is just for a couple of days. My monitor has no dead pixels either. :(

Thanks for the responses guys, I feel a lot better now. MetsFan, that is a good question! :D To be honest, this is my first system that I really have a good possibility to overclock, and I am pretty overwhelmed with all the options. The part I am confused on right now is what the voltages...

OPTERON, that is very interesting. My component ports are doing the same exact thing now, but mine failed within a few weeks. Trying to play xbox on it will only show a distorted green picture. Very interesting.

Hey guys, I have been looking for benchmarks that have around the same stuff I do, but I can't really seem to find many benchmarks for people that have not overclocked yet so it's kinda hard to compare speeds. I think my computer is running slower than it should. I just bought a 3400+...

Hey there, I just bought a AMD 3400+ CH with a DFI UT NF3 motherboard. I am having a hard time figuring out the memory situation though. I have been reading posts and such, but I can't seem to find a clear answer on which is the better route to go. It seems most memory only goes up to 512 megs...

I will have pictures of my monitor soon :) I also seem to have the slight backlight issue where in top right of the screen its a little bright than the rest of the screen, but for me it's not bothersome. Unless you are really looking for it, I don't really notice it so it's no big deal. But...

Newbie question here... if they are seperate rails, how do you combine them to make up that 33A or whatever?

No widescreen support? :( The highest resolution I see is 1600x1200... my LCD is 1920x1200..I wonder if its possible to mod the config file like some games?

I read a review that said the spot for the powersupply was small in this case and if you had a big powersupply it wouldn't fit. I am not sure how big the OCZ is, so does anyone know if I can fit the OCZ Powerstream 520W in the Tsunami? Thanks in advance! :)

My PNY is running pretty damn hot. I think I need a new case, my whole cooling situation sucks. But at the moment I have the side of the case off and my GT is at 60-61c Idle. When the case was closed it was idling 65-66c. This is at stock speeds. How hot can you take these things without...

Just got mine from PCConnection today!! :D I just pushed down on the back -- .. the "bezel" I guess is what you call it.. and the screen went down. So I guess that's all you have to do. I wish there was like a manual showing me how to move this thing, I am kinda afraid to touch it :o

That's what I thought. People who don't care about D3's performance are going to be singing a different tune when their ATI runs slower than the Nvidia on all the different games that use the Doom engine. :eek:

My question is... if the ATI's are doing so poorly in Doom 3, how are they going to do on other games that use Doom's engine? :confused:

Hey guys, I have a question... right now I have a EMU 1212m soundcard, some bookshelf speakers, a sub, and two receivers. I have a Panasonic XR-50 and an really old (like 15 yrs) Pioneer Vsx-5900s.... Right now I have the Pioneer hooked up to the EMU from the analog outputs on the soundcard...

I am getting a 2.1 stereo setup and I want to run it through my computer using digital. I am getting the Panasonic XR-50 and it's going to power my bookshelf speakers and a sub. This is going to be for music and games, I am not a huge movie person. What I want to know is how do I go about...