Search results

so looking at this it sounds like I can have an access database in sharepoint. right? right. However, I also want to have a program like this to be able to modify the database in sharepoint. However that first link says So basically, is it possible to have a simple C# program be able to add...

I'm planning on upgrading my monitor some time this week, but I'm not really sure what I should get. I have a $100 gift card to Best Buy so I want to use that. I'm mainly looking for a 23 inch monitor. And I'd like to spend less than $350. Best Buy Monitors link...

I'm trying to set up an ubisensor system and I have all the sensors set up, but I cant seem to get them to pull an IP address. is how it is supposed to be set up and right now I have all the sensors connected to a Cisco Catalyst 2900 XL and the lights on the switch are green so I'm assuming...

I want to try to make a program in Java that has multiple users but I've never done anything like that in Java. In the past (working with basic websites) I've found that it was easy to store usernames and their associated password in a database and when they log in to just compare the input to...

I have a $100 gift card to amazon and I'm considering upgrading my video card. I currently have a 7900GS. I havn't really kept track of vid cards (or any hardware for that matter) over the past 3 years or so (since I pieced together my last comp) and I was just wondering what were some...

I'm working on a website and I have it so that users can log in and a cookie with their username is created when they log in successfully. Now what I want to do is, if a user is logged in (shown by the fact they have the cookie) I want to replace the username textbox, the password textbox, and...

So for my first graduate course I have to write a research paper (15-20 pages) which I dont think will be much of a problem. However, the paper has to be on wireless security and I dont really even know where to begin. I was thinking of having a section on WEP, but I doubt that will be more...

Tomorrow I am going to be transferring over data from my sister's old computer to her new one and I plan on using a crossover cable. I read through this link : http://www.5starsupport.com/tutorial/networking-crossover-cable.htm to refresh what I knew because I havn't used a crossover cable...

Right now I have a pretty decent system in my opinion but I havn't paid attention to anything that has come out in over 2 years so I have no idea how my computer stacks up nowadays. I have: AMD Athlon 64 FX-55 3.5 gigs of DDR RAM GeForce 7800GS 400w PSU In the fall I'm planning on...

I'm looking at buying a universal remote and the nice ones seem really cool with all of the things you can do with them. Pretty much all I'm looking for in a remote is to be able to turn on a TV, cable box, and surround sound system with a single push of the power button. I'd also like it so...

I'm in an RHCT class and I'm trying to copy files in the usr/share/tcl8.4/encoding directory and picking certain files from that directory with globbing. so I go to that directory, I type cp mac* ~/mac and it copies all the files starting in mac to a folder in my home directory named mac...

is it possible to install vmworkstation on a flash drive? I'm in an RHCT class right now and we have to use workstation and a red hat virtual machine to complete the exercises and I'm afraid that the lab with workstation installed isn't going to be open enough for me to complete all of the...

I have an IBM R51 laptop, and it will not start up most of the time. When it does start up it works fine. Sometimes if I pull the power chord out and the battery out, then replace the power chord it will start up. But that only works like 1 every fifty tries or so. Its not the power cord...

I'm looking to buy some surround sound for Christmas and I really have no idea where to start looking. I'm looking to spend ~$500. Could you guys reccomend some websites or some surround sound setups?

I'm using Borland Turbo Assembler (have to for this class) and the purpose of this program is to take in two ints, a limit and a divisor. Then, starting from one (lets call it count) to test whether count is divisible by 2 or the user defined divisor. If count is NOT divisible by 2 or the...

this probably isn't in the right section but I wasn't sure where to put it... I'm looking for a program that will allow me to press a button(s) to take pre-cropped screenshots and have them saved on my hdd somewhere. I want the screenshot area to be predefined so it takes that portion of the...

I started playing with swing today and I have a small problem. I have a JFrame with an internal frame and I want to be able to close that which I can, but then I want to go to the menu bar and choose File->New which should open up a new internal frame. But when I click on New it makes the new...

I'm not sure if this is the right section or not but here goes. My dad has a DVR/cable box (tuner?) through time warner, and he has another TV but he didn't want to pay the extra cost for the DVR so he just got the cable box. However, he is interested in a DVR for that TV, but he doesn't...

my sister has a pretty old computer, it has a 20gig hd, 512megs of ram, amd 2800+. She mentioned wanting a new computer for christmas and so I thought I might get her one. I put this together http://www.newegg.com/product/product.asp?item=N82E16813121048...

I've translated this code and did the few commands it wanted like but I'm hung up on this command 02 36 33 01. Here's a picture of the hw, the only wrong one is the history of DX. I dont know whats wrong, I should just have to add DH with [0133]. ie 95+95 but it comes out to 12a, so I've...

I have a IBM R51 laptop that will not start up. The power cord works fine, it still charges the battery. This problem has been going on for about a month now. Sometimes the computer will start up, and everything works fine and completley normal, however other times it never turns on. I took the...

I have a IBM R51 laptop that will not start up. The power cord works fine, it still charges the battery. This problem has been going on for about a month now. Sometimes the computer will start up, and everything works fine and completley normal, however other times it never turns on. I took...

I bought this: http://www.moonblinkwifi.com/pd_cantenna.cfm cantenna kit. And I have a can and wire and these instructions: http://bloggedopinions.blogspot.com/2005/11/how-to-build-cantenna.html look like they should work. However, the one end of the cable isn't right. Did I buy the wrong kind...

I'm currently in college and living in an apt off campus. The school has wireless internet throughout most of the campus. Now my question is, would it be possible to build a big enough cantenna to pick up the signal from campus to my apt. I looked up on a map that my apt is 2500 ft approx...

http://www.lynda.com/deke If you sign up with that link you will get a 7 day unrestricted free trial (no need of a credit card) of lynda.com They have a ton of great video tutorials, especially for Photoshop. Just passing along what I've found.

rule the seas is just a simple online game, but I find it to be fun. Basically you're a pirate and you get xp and work on skills and stuff. Just some quick advice: 1) Lucky Dip everyday 2) Get a bank account as soon as you have $25000 3) Dig for treasure 100 times everyday (all can be...

ok I have 4 sticks of RAM in my computer now, 2x1gig sticks, and 2x512 sticks. I just put in the 2x1gig sticks and my comp only recognizes 2.75gigs, I'm ok with it but I just want to know why. My comp: 32bit XP SP2 ASUS A8N-VM mobo AMD Athlon FX-55 7900GS

this "game" was just a website where you signed up and you decided to be like trolls or something else, there were 3 races you could be. You got more people based on how many clicks you got, and more people based on the money you got, you could buy weapons for your people and attack other people...

I have a ListArrayBased class, a Queue class, and a PriorityQueue class. Here is the code for the 3 classes. I have a tester main program that I'm using and I tested the Queue class and it worked just like I wanted but when I try to use PriorityQueue instead of Queue I get an error: Exception...

Over the summer I plan to get a new camera and I've basically been putting it off since the S3 IS came out and now its been over a year (I think?) since it came out and I was just wondering if there were any cameras coming out soonish/over summer that might be a better option than the S3 IS...

I'm looking to buy a new game for the PSP, I have Madden and GTA:VCS right now and they're both a lot of fun, but I need more variety. I was considering a simple game that you can just play like right off the bat and have a quick enjoyable experience. so that is why I'm thinking about either...

I've made a Set class that stores a set of numbers and I want to override toString to make it print out the numbers like this {1,2,3,4,5}. I've written this: public String toString() { for(int i = 0; i<= this.size(); i++) { if(i == 1) { System.out.print("{" +...

This is just to make sure I know what I'm doing: lets say I have a class List and an interface ListInterface and List implements List interface. I'm almost positive that I can then make ListInterface objects right? Also, I'm pretty sure that I can use the functions that are written in...

I just started playing it recently and I'm about 13 hours in(going to Raithwells Tomb) and I have a few questions for those that have played. Are there any optional end monsters, like Ruby weapon in FF7 Are there any characters that are inherintly good at magic or melee or even like better...

I'm trying to make a C program that takes its input from a file through io redirection and stores it in an array(I hope that sentence makes sense). For example to run the program you type program data //where data is a file that has a list of numbers and then program takes those numbers...

ok, I'm trying to use pthreads to sort an array quickly and I'm using odd-even transposition sort so I can use multiple threads. However, I havn't quite grasped threads yet and I was looking for some help/insight. now I know with this line pthread_create (&tid, &tattr, start_func, arg); that...

First off, I'm curious, do you not have to install eclipse? as of right now it is just in a folder on the desktop and it seems to run fine. However, my main question is this, I set the default workspace folder to a folder called workspace in My Documents, then I put a folder called CompSci...

ok I've taken C++ and Java courses before and I know how to compile them and everything but now I'm in a C class and the prof hasn't given us any information on how to compile the files or anything. I know its basically like C++ but the g++ compiler that I have used in the past for cpp files...

hey Im not sure what happened but whenever I use my control key my computer beeps (as if I were hitting two keys at once) and sometimes it highlights everything on the page. Anyone know whats goin on here? Thanks