xDiVolatilX
2[H]4U
- Joined
- Jul 24, 2021
- Messages
- 2,550
Ok let me get to the point:
I am building my dream rig in my new case; the HAF 700.
It has a argb/pwm controller board AND Hub board. (See attached pics of diagrams please to see the devices preinstalled in the back of the case.)
My question is, why do I need both?
Are they doing different jobs?
The smaller device [controller ?] looks like it has 3 argb slots so I'm pretty sure you plug one into the hub right? But then why is there 3 slots and not just 1? That is confusing me. Is it for adding more hubs? Or just 2 additional argb slots?
The larger device (hub?) Has both slots for argb & pwm. I'm assuming this is where you populate every pwm and argb devices/fans here. But do I connect anything else for for both devices to communicate to each other? Or only the argb/pwm from the controller and USB also. Btw I don't know wtf is going on with 2 devices I'm lost lol
This is my first time using either a controller device or a hub device so I want to get a better understanding.
If you could please look at the diagrams I attached and help me understand the difference between the 2 devices and how I can have 24 argb fans (with 3 to 1 splitters) all controlled by these 2 built in devices on the back of my new HAF 700 case I'm literally building in right now.
Thank you in advance.
Ps: Id like to add that I have the CPU/GPU/RESERVOIR argb wires as a set of three connectors, where do I plug these? Into the controller with the 3 ports?
Then I have 24 argb fans do I just plug them all into the hub with splitters?
So many questions and confusion lol if anyone can help I would greatly appreciate it. Thanks again.
I am building my dream rig in my new case; the HAF 700.
It has a argb/pwm controller board AND Hub board. (See attached pics of diagrams please to see the devices preinstalled in the back of the case.)
My question is, why do I need both?
Are they doing different jobs?
The smaller device [controller ?] looks like it has 3 argb slots so I'm pretty sure you plug one into the hub right? But then why is there 3 slots and not just 1? That is confusing me. Is it for adding more hubs? Or just 2 additional argb slots?
The larger device (hub?) Has both slots for argb & pwm. I'm assuming this is where you populate every pwm and argb devices/fans here. But do I connect anything else for for both devices to communicate to each other? Or only the argb/pwm from the controller and USB also. Btw I don't know wtf is going on with 2 devices I'm lost lol
This is my first time using either a controller device or a hub device so I want to get a better understanding.
If you could please look at the diagrams I attached and help me understand the difference between the 2 devices and how I can have 24 argb fans (with 3 to 1 splitters) all controlled by these 2 built in devices on the back of my new HAF 700 case I'm literally building in right now.
Thank you in advance.
Ps: Id like to add that I have the CPU/GPU/RESERVOIR argb wires as a set of three connectors, where do I plug these? Into the controller with the 3 ports?
Then I have 24 argb fans do I just plug them all into the hub with splitters?
So many questions and confusion lol if anyone can help I would greatly appreciate it. Thanks again.
Last edited: