dondan
[H]ard|Gawd
- Joined
- Apr 15, 2013
- Messages
- 1,751
>> The last days I had a lof of time, so i designed a new Case <<
The new Case is not the A+, but a case based on the original Steam Machine. The name isn’t final but I called it actual B3.
Technical Spec’s:
Iam not sure if I should support default GPU brackets or custom brackets like in the drawings. The advantage of custom brackets is that I could make the case width 20-25mm smaller.
By using the HDPlex 250W DC-Powerboard, it is possible to mount a 120mm Fan with an 120m AIO Watercoolingsolution under it.
The case consist out of less party and is very easy to bend.
Pictures:
All pictures not as thumpnail (full size):
]
The new Case is not the A+, but a case based on the original Steam Machine. The name isn’t final but I called it actual B3.
Technical Spec’s:
- Dimensions: 68.5mm, 316.5mm, 306mm (HxBxT)
- Volume: 6,63 Liter
- Graficcard: max length 295mm, dualslot
- Motherboard: ITX
- Power-Supply: SFX, SFX-L and HD-Plex250W + 120mm Fan
- Harddrive: 2x 2,5“ HDD/SSD
- Cooler: CPU-Cooler max height up to 48mm
Iam not sure if I should support default GPU brackets or custom brackets like in the drawings. The advantage of custom brackets is that I could make the case width 20-25mm smaller.
By using the HDPlex 250W DC-Powerboard, it is possible to mount a 120mm Fan with an 120m AIO Watercoolingsolution under it.
The case consist out of less party and is very easy to bend.
Pictures:
All pictures not as thumpnail (full size):
]
Last edited: