Search results

Avahi can reflect mDNS across subnets. Pretty easy to setup. http://avahi.org/

Looks to me like an older Network General\Netscout Infinistream box.

"sh dot11 associations all-client" works fine for me using a "fat" IOS AP. It's only going to show you locally associated clients though. http://www.cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/command/reference/cr43main.html#wp2142440 I think the following part is the key...

Use easy multiples of the block to get into the range you need to be faster, ie, count up by 16, 32, 64, 128, etc. Say for example you have 192.168.1.146/29, and need to know what network it falls into. /29 = increments of 8, so we can just use a multiple, 128, to get up into that range quickly...

Cisco 3550\3524\3548's are all pre 802.3af standard, may not be the best choice depending on what you are powering. The HP J8762A is an 8 port 802.3af compliant switch and can be had for a relatively reasonable price.

I know a few people who are looking here in Phoenix....I'll pass the word around. Sounds like a pretty sweet gig.

They did mention in this thread over at the EVGA forum that they have a 1GB model with a reference style cooler on the way. Post in it if you're interested, maybe we can light a fire under them.

It should....mine does anyway. That's actually the most entertaining thing about it, lol.

Oh, and also, try the following. radtest bob hello localhost 1812 testing123 1812 should be the default port that freeradius is listening on.

It's been a looooong time since I setup my freeradius box, but I still have these sites bookmarked...I set mine up with a mysql backend, just because it's so much nicer to add/remove/change users and whatnot...

The other nice thing about that 2045 is it looks like the HDD compatibility list is much more current, even lists the WD Greens. Not sure if the 3085 supports them also, but that could be a nice perk for the 2045 if they really do stay functional on that controller.

Make sure to look into bundled cabling also if you haven't already. Pulling 1 cable for 2xCat6 and 2xRG6 drops FTW. http://www.deepsurplus.com/Network-Structured-Wiring/Multimedia-Cable-Composite-Ethernet-Coaxial-Fiber-Optic-Cable

If it was the one that went for ~150, yup, that was me. :cool:

Well I'll finally be ready to peer here in a few days. Got a smoking deal on the 3725 I was watching, so it will be going into service instead of the 1760 after I pick it up.

Nice, I'm in! I'll have to dig up an IOS that supports IPSec\BGP\GRE and throw it on one of my routers this weekend though. I think I can cram one that supports it on the little 1760 that's laying around here. Oh, and I'll see if I can get a couple people at work in on this too.

Thanks for the tips from everyone so far. I think I'm going to change my plans slightly, mostly due to an oversight on my part. When I originally spec'd this out, I was thinking of using the RPC-3216.....so the 2 SAS card's would have supported all the hot swap bays, and I could use the...

So I've been playing around with what all I'll need to put a decent low power Intel Atom based storage server running WHS together. Here's what I've got so far... Motherboard\Processor: Supermico MBD-X7SLA-H-O - $139.52 RAM: Crucial 2GB (2 x 1GB) - $23.99 Controller Card(x2)...

I was able to get it working by doing what you suggested and echoing out the variable into the field before it is passed through via POST. Thanks!!

Let me preface this whole debacle by saying I'm quite the noob at PHP.....I'm basically just googling and teaching myself via tutorials as I go along. Apprently I've hit the wall in both my php-foo and google-foo. I'm hoping someone can drop some knowledge on me here. So I've been trying to...

Quit raining on my parade man! :D Hint: ^ this guy has single pieces of gear that are worth more than my whole lab, LOL

Just getting started in this whole photography thing..... All were on a Canon XTi, EF 50mm f\1.8 lens, EXIF data should still be on em.

Sure.....from the top down..... The Ubiquitous Linksys WRT54g 3550-48(Enhanced Image) 2950-48(Enhanced Image) 3548XL 1760-V (W\WIC-T1-DSU) 2621XM (w\WIC-T1-DSU & WIC-2T) 2620XM (w\WIC-2T) 2620 (w\WIC-2T) 3640 (w\2xNM-4T) 2620 (w\NM-32A, acting as a terminal server for everything...

Here's my lab setup in it's current incarnation.....(not the greatest quality, but the lighting sucks in the nerd cave) Have a couple 2620XM's on the way...slowly trying to get rid of anything that won't run 12.4. On the prowl for another 2950 to get rid of the 3548XL also. : From the top...

Bingo. I quickly hit a magical glass salary ceiling that a degree pushed me through. I still haven't figured out this whole debate though. Why not just get both in true [H] fashion? :D

Depends a lot on how your infrastructure is setup (mostly what client you are using). We're an all Cisco based shop, so it's as simple as setting the Cisco VPN client to bring up a login screen alongside the default windows login box. (Quite a few VPN clients allow this if I remember correctly...

Depends on how much bandwidth you really need, as you will be bottlenecking the bandwidth between the switches to 1Gbps (assuming you are only using one link between the two). If you have multiple clients trying to pass data across that link, you may see congestion on it. I would go with a...

I'm in.

Woooooo! Router upgrade.....gimme that extra 2MB down!

Anyone know of an HP router/switch simulator program? I may be working with some in the near future and would like to play around with them to get a feel for the OS. My experience with HP switches so far has been pretty much limited to un-managed or web managed gear.

Uh, so logic would lead us to believe that they probably don't want you to print them out since they will be providing you with them later. Bottom line is that it's specifically noted in the forum rules. I'm not sure why people ever post these kind of questions on forums and wait for answers...

Budget is going to be a huge factor here. If building on the cheap: trixbox + phones of your choice. If you really want to be cool, setup openfire also and integrate it with asterisk. This would be quite handy in a call center environment. If you've got a large budget, head for a major...

http://cgi.ebay.com/Chromatic-50-Meter-2mm-Duplex-LC-LC-50-125-Fiber-Cable_W0QQitemZ170177408765QQihZ007QQcategoryZ64046QQssPageNameZWDVWQQrdZ1QQcmdZViewItem fiber on the cheap....

Figure I may as well post this here too.... Nokia IP330 running pfSense.......400mhz, 512 RAM, 4 Gig CF card. Replaced the fans in it and moved them to the 5V line, also added some heatsinks in some key areas, runs pretty much silent now. Five interfaces total, pretty nice. Very quick...

Yup, Solaris 9 or 10 on all of my sparc boxes. Thought about loading up Debian, but haven't had the time to try it out on one yet......and I really like all my LOM features :p The 380 is being a pain in the ass as of late.....just loaded it up with 6 73gig drives, and the Smart Array 5i...

Skyline got it, just a normal SKB rack. Got it on eBay for about $40 bones. I think it's about 18" from front rail to back. Currently have pfSense on it.....awesome little box. Quieted down the fans a little and now it's pretty much perfect. Those in the photos are Netra X1's. There's a...

I hate moving.....here's the temp setup until everything is moved in and setup again. Sorry for the crappy pics.....the decent camera is somewhere in a box with the rest of the network, lol. I <3 flight cases..... Starting to get stuff moved over....everybody needs a little fiber....:D

Yup, just messed myself. I <3 shiny new Sun hardware.

Really, it's for the better. Google is just trying to save you from myspace.

May want to check out cacti. Can use it to gather bandwidth usage information from those switches vis SNMP I believe.