Search results

Well I was wondering if someone with thick rads used them as exaust and fixed a heat issue..? I used the top rad as an exhaust and it fixed some of the heat but I was wondering if I did the same with my front rad if it help? Anyone had this issue?

Case is a TT view 71

All ek blocks I run all my fans at full mast I have a mix of tt fans and generic cheap fans.

I was thinking about putting spacers on the gromits that hold the glass and give it an extra 1/2 inch of space for air.. but I'm not sure where to get the thumb screwes that have an extra 1/2" of screw on them.. but with the way things are I get roughly 65c on CPU max and 58c on GPU and 80c max...

I mean I would think what I have is a enough for just a 10700k and a single 2080ti but I think maybe the case could be the issue as it has all tempered glass on all 4 sides ty view 71

Also I was considering adding one more d5 to move the water faster.. I have a 250ml res and two extop acrylics and was thinking of putting a d5 res combo and putting my 240ml tube on it.. should I add another reservoir? Will that cool things off by adding more water volume?

It just seems life the thicker rads hold heat longer or more than the thinner rads.. just for an opinion as I don't expect the answer considering..

Or should I have gone thinner on my radiator?

Also another question is I have two thick rads both are 360mm 65mm and they seem to hold a lot of heat and I got the top pushing air out and the front pushing air in and when the system gets hot they act like furnise heaters and keeps the air hot on the inside.. I'm just wondering if I should...

I am not sure the suction on the d5 vs the output but I thought this would help the first d5 by drawing the water from the first pump.

Well by dumping 1 pump into top rad into d5 number 2 doesn't wear out my head pressure? Cause.i mean the rad is essential y a res open space as I'm sure it doesn't hold any pressure or fill all the way to the top

I mean I remember z270 and z370 had this issue

Z490 should have enough with an extra 4lanes for nvme I believe

Yeah I'm trying to look up the pci lane of my motherboard.. I have 2 names which should run x4 a peice and a X1 sound card but I have seen the GPU still run at x16 I don't have pci gen 4 nvme but I can't find the listing

Yeah I'm trying to look up the pci lane of my motherboard.. I have 2 names which should run x4 a peice and a X1 sound card but I have seen the GPU still run at x16 I don't have pci gen 4 nvme but I can't find the listing

Yeah, I checking and it's pcie v3.0 x16 8.0 gt/s @x8

U mean look and see with no GPU does it drop to x16? I mean even with only 1 GPU it should still run at x16 correct?

My 80c is only while gaming

Could spyware mimic a second GPU and run as if it were sli.config recording.my screen?

I have a z490 mobo with 11700k and.my GPU is stuck at x8. I have a nvme as boot and a 2tb nvme as games drive and X1 sound card. I thought z490 would have enough pcie lanes to still run x16 on GPU and I haven't set any alter.configs to run nvme as pci. So what could cause this to happen? I have...

I set up a dual d5 loop as a series but spread out.. but I still get ram temps and hottest points on GPU at 80c max 63c on core. What I did was my 200ml res is fed to d5#1 then directly into CPU then from CPU to 360mm 65mm #1 then from there directly into D5#2 then it proceeded into GPU water...