Search results

I'm looking to set up a tunnel from my home network into the office (maybe a secondary data centre if the connection in the office goes down but one thing at a time) and I'm wondering is there a good document on setting this up? Right now this is the document I'm looking at but I don't know if...

I've been pulling my hair out about this one, here is what I want: WAN------------PFSense(LAN)---------------------------Linksys Wireless 192.168.1.x ___________________(OPT1)----VPN(OPT2)-----Cisco AP1240AG 192.168.2.x _ lines are just for formatting :) But when I turn on the VPN...

I don't have any experience with a Cisco wireless setup but soon I will be getting some hardware to play with and I have some questions. The hardware I am getting is a couple 3502 APs and a 2112 controller, the WAP's I'm borrowing and the controller I get to keep. My set up will be the following...

I'm pricing out a Firewall/Router for a small business, 6 PCs and a Server with a 30/30 internet connection, does anyone have any suggestions? I am not going used as they want full warranty support

I'm building a couple servers to have colo'd but I can't find appropriate 1U server chassis does anyone have any suggestions? The motherboards I already have are as follows: Supermicro X7DWA-N Intel S5000XVN One issue I'm going to run into is neither of these have onboard video as I was...

I doubt this is the correct forum but I couldn't think of one that matched. I'm building a couple servers to have colo'd but I can't find appropriate 1U server chassis does anyone have any suggestions? The motherboards I already have are as follows: Supermicro X7DWA-N Intel S5000XVN One...

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=140853426697

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=140839756510

Fantastic automatic watch Currently low bid http://www.ebay.ca/itm/140834063253

Hey I'm selling my 3845 I just don't have time to play with it and it's been sitting in my basement. I'm looking for $800 + shipping as this beast is big. This is the first thing I've tried to sell here but here is my eBay and I've been really active in the past on HeadFi Quick specs...

I just got a Celestix MSA 2000i and installed PFSense on it but I'm getting really poor throughput, wireless 23mbps/wired 24mbps-ish on a 100mbps connection. This is my first time running PFSense does anyone know what could be holding me back. The specs are as follows: Intel Celeron 3.06GHz...

I'm studying for my CCNA and unfortunately I only have one switch I was wondering if I segment the switch into say 8 VLANs of 6 ports will it act as essentially 8 different switches that I can use to try OSPF etc..? Unless VLANs aren't what I am looking for does anyone know if there is a feature...

Has anyone resolved this issue before? I have a system that is unable to map shares from one particular server, the net use command gives a system error 67, but can map via IP, and can map shares by name for any of our other servers. All of our other PCs are working fine, I have tried...

I'm looking at my options regarding bulk data providers in Canada does anyone have any suggestions? I would like to get as close to the pipe owners as possible cutting out the middle men. My list so far is (with their fastest provided speed I can see): Telus - 1G Bell - 10G Allstream -10G...

I plan on running a 2651 (non-XM) as the router on my home network and I'm wondering what kind of throughput people have gotten on it? I have a 100/5 connection and can reliably get 54-56/5, though my ISP is proclaiming network upgrades are on the way (heh I'll believe it when I see it). *Edit*...

I was given an old patch panel from work it is in perfectly good shape but I was wondering; I'm looking at running Cat6 through out my house and will whether it is a "Cat5e" or "Cat6" panel make a difference?

I just got a Dell Powerconnect 3324 from work and well needless to say it is very loud. I am wondering does anyone know a good fan replacement that will do the job and not be nearly as loud? It currently has two Sunon KD1204PKV1, 40x40x20mm, 12V, 8.9 CFM, two wire fans.

I'm looking at wiring my place and the best local place I could find is Anixter, I was wondering do they sell to end users or only to businesses?

I just picked up a Panasonic 50GT30 screen and I am using a Pioneer SC-07 receiver. I am wondering if there is an issue piping 3D video through my receiver or do I need one HDMI 1.4 compliant? My two main sources will be my PS3 and my i5-2500k HTPC. I really dislike 3D I just want to know if...

We're running an office off of an HSPDA+ to wifi hotspot (no wired ports) and our four computers work fine they are getting 192s from the DHCP server but they cannot ping each other. My issue is I'm trying to connect two printers through USB on two different machines and share it with the others...

I've decided to go through with my build so I thought I would run the parts list by you guys and see if there are any changes you would recommend. I will be running Windows 7 with bitstreaming. 2x Corsair 4GB PC3-10600 SO-DIMM Silverstone SG05BB Asus P8H64-I Deluxe Intel Core i5-2500k...

I'm looking to buy my first HDTV since my 720p Sony LCD Rear Projection and I can't seem to find a good site for TV reviews. Does anyone have any suggested sites? Or any suggestions? I'm looking for a 46" model up to $1600, 3D is not a requirement.

I'm looking to build a quiet HTPC using a 2500k and a Silverstone Sugo SG05BB chassis. What is a good cooling option that is quiet as well? I am tempted by a H70 but I've heard they aren't too quiet. I'm about ready to click checkout I just want to make sure I have something that fits.

I'm in the process of re-thinking my home theatre situation and I need some opinions. Currently I'm using a Boxee Box and it is falling out of favor with me for a few reasons: 1. I never really liked the interface, coming from a skinned XBMC setup 2. It doesn't do blu-ray menus from ISOs 3...

http://www.xbitlabs.com/news/graphics/display/20110913141155_AMD_Demonstrates_Radeon_HD_7000_Southern_Islands_at_Event.html

I'm in the early planning stages of starting a colo business and I'm looking into redundant WAN links, I'm looking at getting fiber from two companies aggregating them with automatic fallover. Is link aggregation the best option? Am I even looking at the right solution for want I want? The issue...

Are there any issues running devices off a power bar connected to a UPS?

*Solved* I'm running into an issue on my network in our main office we're getting 15/15 then we have a connection to a remote office through a cable run to a switch and they get 15/15. We have four ports run to another office no switch and one computer is getting 15/15 and another is getting...

I need assistance choosing an 3000VA UPS, I have a couple in mind the models are below: Cyber power PR3000LCDRTXL2U APC SMX3000RMLV2U I would tend to default to APC because of the name but it is 40% more expensive and the Cyber Power has a much higher surge rating ~500 vs ~2000. Any...