WTB: ATX PSU with 80mm exhaust

[jimthebob]

Looking for a replacement PSU for a (just tonite) dead Enermax PSU. No real power requirements as this is a Pfsense router with lower power components. I'd prefer something not super old.

The only real requirement is that is utilizes an 80mm cooling solution as the 2u rack case this system is in doesn't allow for top/bottom venting PSu (for obv reasons).

Please hmu with what you have. Doesn't have to be modular or anything fancy (tho it'd be nice, it's not required). Just a solid not too old unit that can power a quad core Xeon Pfsense box. TIA!

 

[Randall Stephens]

my recommendation at this point would be to source an SFX PSU with an adapter and run with that. The adapter will leave just enough space for the fan to breathe.

 

[rhkcommander959]

You're not likely to see 80mm and modular, I'll let you know if I find anything.

There are some passive PSUs, might fit the bill too? Not too hard to mod it up either if you're handy.

 

[xDiVolatilX]

I might have a Thermaltake 550 with a 80mm fan on it in the basement but it's not modular iirc. Want me to look for it?

 

[dbwillis]

Ive got 2 that might be of use:
Sparkle "SPI700W7BB" (came from a 2U machine)
Sparkle "SPI300F4BB" (came from a 1U machine)---last pic
Just cover shipping

 

[jimthebob]

You're not likely to see 80mm and modular, I'll let you know if I find anything.

There are some passive PSUs, might fit the bill too? Not too hard to mod it up either if you're handy.

I appreciate the response but due purely to frustration and not whatsoever a few drinks, I missed and obvious solution to my problem last night. I'm gonna close this thread down but wanted to give those who responded a heads up.

I might have a Thermaltake 550 with a 80mm fan on it in the basement but it's not modular iirc. Want me to look for it?

See above response, I derped last night and missed an obvious solution. Just dropping in to thank those who offered help and let y'all know I'm gonna close this thread out.

Ive got 2 that might be of use:
Sparkle "SPI700W7BB" (came from a 2U machine)
Sparkle "SPI300F4BB" (came from a 1U machine)---last pic
Just cover shipping

Thank you for responding and offing up the PSU's. I have however figured out I overlooked an obvious solution last night and am no longer looking for a PSU with an 80mm fan. Just wanted to drop in and thank those that responded and let you know I'm gonna close this thread out.