Hi all, if your reading this post, thanks. I have the Abit NF7-S mobo with a 2500+ and am ocing my cpu from 1.83 to 2.3 but I can't seem to get above 210X11 with out stability problems. I'm using King Hyper X PC4000 and even with the stock setting on the memory, I can't get it to run stable at anything above 210. I've tried 230X10 with a cas3 8,4,4 and the maching still won't run stable. And most of the time above 215, 220 fsb the maching won't even boot. Is there a bios that has seemed a little better for ocing? I believe i'm running the default bios for this board. I'm not sure which one it is but if you must know I can post it. My system specs are at the bottom of this page. Any suggestions would be great. Thanks