How about a traditional layout with 44mm cooler height for the Thermalright AXP-100 without a fan with an ATX PSU right on top as a CPU cooler as well? SilverStone had cases with cooling like that, I actually have an SG02/ w the NT06-E doing exactly this. That'd be 130mm which is what you need for a video card anyways. The fan in an ATX PSU could easily provide CPU cooling. There's an empty space on the front right, two 3.5" bays being 50.8mm this would easily fit without interfering with the PSU cabling with the 147 long angle along the motherboard. That'd mean at least 170mm+102mm=272mm long video cards are supported which is necessary anyways because higher end cards are 10.5". Still only 10L (calculated with 155 height, 290 length, 222 width) and would be cheap to create and populate, no expensive SFX PSUs, no risers. Basically a cheaper Sugo SG05 revised for a 10.5" GPU and ATX PSU but with slightly lower height.