Post your Corsair Obsidian 800D Pics here!

http://hardforum.com/showthread.php?t=1579623

sexy700d24.JPG


sexy700d28.JPG
 
Last edited:
The1stCAV said:
Liking the red/black theme going on. Looks clean & roomy

How is your CPU-360 working out for you?
Click to expand...


CPU @ Idle 28 ~ 31 (One core is always like 5 degrees higher then the rest so this is the average of them all).
GPU @ Idle 30 ~ 32

CPU @ LinX 53 ~ 55
GPU @ Kombuster 38 ~ 40

CPU & GPU being slammed is about 60 on the CPU and 53 on the GPU. I'm not sure what the room temps are, probably about ~20 degrees (Celsius). If I'm really worried I can just pop the window which is right behind the tower top exhaust in the winter months, or turn the A/C on in the summer.

It was expensive and I initially thought I killed my MCP655, but a proper priming externally fixed that.
 
DarkStryke said:
CPU @ Idle 28 ~ 31 (One core is always like 5 degrees higher then the rest so this is the average of them all).
GPU @ Idle 30 ~ 32

CPU @ LinX 53 ~ 55
GPU @ Kombuster 38 ~ 40

CPU & GPU being slammed is about 60 on the CPU and 53 on the GPU. I'm not sure what the room temps are, probably about ~20 degrees (Celsius). If I'm really worried I can just pop the window which is right behind the tower top exhaust in the winter months, or turn the A/C on in the summer.

It was expensive and I initially thought I killed my MCP655, but a proper priming externally fixed that.
Click to expand...

Yeah those are some good temps, I am getting around the same in my loops, though my three GTX 580's actually average 28c idle and 48c load. I was actually thinking of getting the CPU-370 and moving the CPU-360 to an HTPC build. Koolance came out with the 370 version that is an improved 360 block.

The MCP655 pump is great! I tried mutliple loop configurations this past weekend and some were without the MCP655 installed in Frank and just relying on the MCP655 24v in the ERM unit to push it all through. Though the 24v version is more powerful than the 12v version, it could not handle the CPU, 3 GPU's, and the MB block run. It needed the 12v MCP655 pump inside to assist through all that resistance.

Great build though - very nice, great temps, I am sure you are happy with the performance as well. Congrats on a job well done!
 
You guys got som great cases!

Wating for the Aquacomputer Aquaero 5 to arrive :)

Obsidian 800D
I7 2600k@4,5G@H70
HIS HD6990 - Sapphire HD6970 CF - With EK Plexi - Nickel
Aquacomputer XT Ultra - NexXos Extreme rev. 2 3.120@top, EK 1.120@bottom
EK Bay spin Acetal
2xCrucial C300 64GB Raid 0
Gigabyte P67A-UD7
Corsair Vengeance 8GB 8C
Coolermaster Silent PRO Gold 1200W
3x24" Eyefinity 5760x1200

And all things i just forgot?!?

P1050287.jpg


P1050286.jpg


P1050280.jpg


P1050279.jpg


P1050271.jpg


P1050270.jpg
 
Here is my 800D

Version 1.0 (the suck version)
IMG_0762.jpg


Version 2.0 far better -
IMG_0781.JPG


Version 3.0 - (coming soon)
 
WOho glad to join this thread. I love the 800D just got a few days ago.



Uploaded with ImageShack.us

Still adding more parts and planning to put everything back to water soon.

And yes my temps do suck lol

I would like to thank the the1stcav for all his help with Victor.
 
Last edited:
Just ordered an 800D side panel for my 700D. This weekend gonna pop for a CPU block, res and 360 rad. White tubing. Then I will do the cable sleeving in white and another color.

Gonna be sick.
 
schizrade said:
Just ordered an 800D side panel for my 700D. This weekend gonna pop for a CPU block, res and 360 rad. White tubing. Then I will do the cable sleeving in white and another color.

Gonna be sick.
Click to expand...

sounds like it post pics good luck
 
Damn 800D Windowed panels are on Back Order... shit.

WC is in, and even with the crap fans that XSPC provided the temps are damn nice. I have a stack of some nice scythe fans from my old Antec 900, but I apparently ran those into their grave, cause they sound like meat grinders... lol.

The Scythe Kaze Master Pro controller is awesome. I was going to use an old Vantec 4 channel controller, but I cannot find it in my boxes of crap. This is way better anyway.

My wife has vetoed the white, and wants Red accents inside. So red tubing it is, with red and black sleeving. I might toss in a Red CCFL, but will need to put a toggle switch on it cause the days of constantly glowing shit is long gone for me, and UV makes my eyes cry.

I will post some pics tonight, so you guys can laugh at my first WC attempt. Then I will dig through 500GB of old shit and find the pics of my Vapo Chilled Slot A Athlon 700 and you will bow before me... lol. What a hack job those were. The term "kit" was a very loose one. More like, "Here is a phase change cooler, a circuit board and some instructions... now start soldering bitch!"

Modern WC is like paint by numbers. I cannot believe I didn't do it sooner.
 
Ignore the shitty wiring. Have to get a sleeving kit, but no more fun money.

IMG_20110722_200448.jpg


IMG_20110722_200456.jpg


IMG_20110722_200437.jpg
 
Here's mine, i love the case but the stock fans suck.

BB147561.jpg


BB147562.jpg


BB147568.jpg


BB147565.jpg


BB147563.jpg

Endlesly hoping for a X58 fullcover waterblock! The chipset on the ASUS Sabertooth x58 is running very hot so i had to install an old AMD cpu- fan on it.
 
sorry for the crappy iphone pics, but heres my 800d

photo3.jpg


Replacing the ax850 with a ax1200 and waiting for my 580's to come in with my u3011
 
schizrade said:
Ignore the shitty wiring. Have to get a sleeving kit, but no more fun money.
Click to expand...
Wow, my setup is very similar. Same reservoir, same fan controller, triple rad up top. My LG Blu Ray is in my workstation, Samsung in my Corsair.
 
Twright said:
sorry for the crappy iphone pics, but heres my 800d

photo3.jpg


Replacing the ax850 with a ax1200 and waiting for my 580's to come in with my u3011
Click to expand...


Fucking awesome. I am also contemplating building my system using white tubing as well. Looks sick. How does it look in real life? What cathode light is that? Apogee XT I assume as well?

Could you post your full specs? (or message me) THANKS!
 
Greetings,

I hope I'm doing this right. I ended up painting the case with standard spray paint. Nothing fancy. This is the rough shots of it before the finish coats. Corsair needs to make a white version of the case for sure.

Image_01.jpg

Image_02.jpg

Image_03.jpg

Image_04.jpg

Image_05.jpg

Image_06.jpg

Image_07.jpg

Image_08.jpg

Image_09.jpg
 
Last edited:
Tylergoodguy said:
Greetings,

I hope I'm doing this right. I ended up painting the case with standard spray paint. Nothing fancy. This is the rough shots of it before the finish coats. Corsair needs to make a white version of the case for sure.

http://i465.photobucket.com/albums/rr19/tylergoodguy/Image_01.jpg[/IMG
[IMG]http://i465.photobucket.com/albums/rr19/tylergoodguy/Image_02.jpg[/IMG
[IMG]http://i465.photobucket.com/albums/rr19/tylergoodguy/Image_03.jpg[/IMG
[IMG]http://i465.photobucket.com/albums/rr19/tylergoodguy/Image_04.jpg[/IMG
[IMG]http://i465.photobucket.com/albums/rr19/tylergoodguy/Image_05.jpg[/IMG
[IMG]http://i465.photobucket.com/albums/rr19/tylergoodguy/Image_06.jpg[/IMG
[IMG]http://i465.photobucket.com/albums/rr19/tylergoodguy/Image_07.jpg[/IMG
[IMG]http://i465.photobucket.com/albums/rr19/tylergoodguy/Image_08.jpg[/IMG
[IMG]http://i465.photobucket.com/albums/rr19/tylergoodguy/Image_09.jpg[/IMG[/QUOTE]

Awesome paint job, congratulations!
Click to expand...
 
Originally I thought I would. When I play though I don't notice it at all. The room it's in has a corner that's to the right that I'm thinking about putting a shelf on to support the case when I get a third monitor for eyefinity.
 
Here's an updated pic of mine, specs:

Intel i7 920
Asus P6T6 Revolution
GSkill Ripjaws 6 x 4GB
2x EVGA GTX 465
LSI 9265-8i
2x Corsair Force 3 120GB
Xigmatek 1283
3x Silverstone AP121s
Corsair HX1050

I upgraded to the Sata III backplane, but it doesn't work with the SSDs, supposedly Corsair is looking into it since others are having problems too.

DSC_0419.jpg
 
You must log in or register to reply here.
Back
Top