Red Machine D
Gawd
- Joined
- Jan 16, 2005
- Messages
- 945
So my GA-Z77X-UD5H is working great except for one problem:
Sometimes, when I soft reset the machine, the motherboard gets stuck in a loop during POST. The readout on the motherboard will read 15, then 4F, then 72, then 96, then zip right back to 15. Normally it goes to 62, then 99, then A0 and boots normally. Sometimes during this loop it'll escape and boot normally, other times it'll keep on going until a hard shutdown is forced.
I'm using stock BIOS (F4), was concerned about updating if the latest BIOS still had mega issues. Is it an issue with all versions?
Sometimes, when I soft reset the machine, the motherboard gets stuck in a loop during POST. The readout on the motherboard will read 15, then 4F, then 72, then 96, then zip right back to 15. Normally it goes to 62, then 99, then A0 and boots normally. Sometimes during this loop it'll escape and boot normally, other times it'll keep on going until a hard shutdown is forced.
I'm using stock BIOS (F4), was concerned about updating if the latest BIOS still had mega issues. Is it an issue with all versions?