Gents:
I've built a new (repurposed) rig for hosting my media server. Looks like this:
Z77a G45 MSI Mobo
3570k
2x8gb of ddr3 ripjaws
Two h310 RAID cards flashed to HBA's
Attempting FreeNAS 11.2
So, here's the bitch of it:
Using the vga port, minimum boot with both ram stick populated, it starts FreeNas just fine.
When I add HBA's is where the shit hit the fan.
If I add the HBA's in any configuration of the x16 slots, I get an message that there has been a CPU or RAM change and prompts me to enter bios config. Only half the ram will appear. Restart. Then no video output at all. Remove both HBA's, boots fine.
I am truly stumped here. Anyone have an idea what the problem could be?
I'm pretty much stuck.
I've built a new (repurposed) rig for hosting my media server. Looks like this:
Z77a G45 MSI Mobo
3570k
2x8gb of ddr3 ripjaws
Two h310 RAID cards flashed to HBA's
Attempting FreeNAS 11.2
So, here's the bitch of it:
Using the vga port, minimum boot with both ram stick populated, it starts FreeNas just fine.
When I add HBA's is where the shit hit the fan.
If I add the HBA's in any configuration of the x16 slots, I get an message that there has been a CPU or RAM change and prompts me to enter bios config. Only half the ram will appear. Restart. Then no video output at all. Remove both HBA's, boots fine.
I am truly stumped here. Anyone have an idea what the problem could be?
I'm pretty much stuck.