Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
clock/voltage on the 7700k? Bare die or relid?What kind of temps (idle/load) would I be looking at if I did a custom loop with just a 240mm rad cooling a 7700k and 1080ti @ stock speeds?
It would be delidded with the IHS free standing @ 4.2/4.5 boost gHz/1.250 V.clock/voltage on the 7700k? Bare die or relid?
Near ambient, considering 1.24-1.28 is the stock VID range...It would be delidded with the IHS free standing @ 4.2/4.5 boost gHz/1.250 V.
What kind of temps (idle/load) would I be looking at if I did a custom loop with just a 240mm rad cooling a 7700k and 1080ti @ stock speeds?
Hi all,
I am trying to install z270i with dark rock tf.
I have a hard time skrewing the skrew of the rad.... when the mobo is in the case....
Should I Fit the rad on the mobo and then fit the mobo in the case?
In that case, do you leave the PSU in?
Can someone share the correct order of assembly - tx
Confirmed, I redid the conductonaut.This is interesting. Can you go into detail with exactly what your C14S fan setup was? I'm running around 8-10 degrees cooler on the regular C14 at 5.1 delidded.
I did it with the PSU in, mobo in the case, and power cables already plugged in. Then I mounted the Dark Rock. You have to carefully line it up, apply some pressure and screw in at the same time. Once you get one of the screws to catch go to a second, with two screws it is all home free from there pretty much.
Did you use the plastic clips to hold the screws in place?
It is just about possible to fit an EK Coolstream 240 XE into the M1...
Wow, dust really shows up.
It would be a very tight fit with a 60mm radiator. A rad that thick really needs push/pull which you won't be able to do.
I highly recommend HW Labs Black Ice Nemesis GTS 240. 300mm thick and works amazingly well.
It would be a very tight fit with a 60mm radiator. A rad that thick really needs push/pull which you won't be able to do.
I highly recommend HW Labs Black Ice Nemesis GTS 240. 300mm thick and works amazingly well.
Seconded. I used the 280mm version of those for a long time, and they're amazingly quiet and high performance for how thin they are. They beat out a lot of the normal, thick rads that I've tried.
Glad to hear it worked for you. Any tips for helping me line up the rads with the side bracket? Also, what screws did you use? The fan screws that came with the M1 are too big for the rads.So finally spent like 5 hours last night doing my build in the v5 m1.
Asus Z270I
i5 7600k
Trident Z RBG 16G 3200
EVGA 1080 FTW Hybrid
Silverstone SX700-LPT
Corsair H75
Some things I learned, it sucks trying to fit all this into the M1 but looks great and works great once it's done. Fitting the hybrid in there with the psu fan facing out is impossible so I eventually flipped it around.
Also had to switch the m1 nameplate on the back with the power plug so that my radiators would fit without issues. Overall it was easily the hardest build I've ever done seeing as every other build I've done has been in a mid tower.
I'm curious about the PSU fan orientation. Should I have it inward heating the PSU but increasing air circulation inside the case or facing rear for fresh air?
I'm curious about the PSU fan orientation. Should I have it inward heating the PSU but increasing air circulation inside the case or facing rear for fresh air?
I have the 1080 with acceleroHas anyone tried putting the 1080Ti in the NCASE with an Accelero? Curious on how much higher the temps will be compared to the 1080.
Glad to hear it worked for you. Any tips for helping me line up the rads with the side bracket? Also, what screws did you use? The fan screws that came with the M1 are too big for the rads.
I have the 1080 with accelero
I quote my message.I have 62-64° max peak aprox in bf1 4k with 1000 rpm intake fans
The CPU increase the temps 2°, 58-60° peaks 4,6ghz
what is the temp difference like between that and the reference fan?
Does the accelero fit any reference board?
Could someone help me out here? I'm nearly done finishing building the NCASE, and I decided to test it out. Only thing that was missing was the GPU. I have 2 bottom 120mm Noctua fans, A U9S cooler with two fans pointed vertically, and a thin 92mm exhaust fan at the back, as shown in the picture.
CPU has not been overclocked. RAM is at 3200 MHZ (CL14).
Judging by others with the same cooler, I was expecting good results. But when running Prime95, my temperatures jumped all the way up to 85c. And this was with both CPU fans at their fullest speed. I didn't even have any of the case doors on or any GPU installed.
i7 7700K. I don't know the voltages but it hasn't been overclocked so it's at stock. Yes, I was using v2810. I'll try v27.9 and give you a feedback on that.
I'm afraid I have next to no experience in delidding, but never thought I would need to do any, seeing as I have no intention of OCing.
I don't have the NCASE yet but I'm thinking about how to setup it for a few weeks already so what I will say is only my own logic speaking.Could someone help me out here?