How to connect 3 - X-Star DP2710

[willow]

I want to hook up 3 of these. They require a dual-link DVI connection & my GTX650 Ti boost only has 2. I tried using a Display port adapter to DVI, but that didn't work. Any suggestions?

 

[Godmachine]

There are no mini displayports on that card correct?

This could work :

1. Adapter for Displayport to mini displayport : http://www.newegg.com/Product/Product.aspx?Item=N82E16815158233

2. Powered active adapter for mini displayport to DVI (dual link as well) : http://www.monoprice.com/Product?c_id=104&cp_id=10428&cs_id=1042802&p_id=6904&seq=1&format=2

That should work for you but you won't be able to overclock the monitor on this setup.

 

[willow]

No mini display port on my card. It has 2-dvi, 1-hdmi, 1-display port.

 

[Godmachine]

No mini display port on my card. It has 2-dvi, 1-hdmi, 1-display port.

Ok then buy the Displayport to mini displayport cable I linked and the powered mini displayport to DVI adapter and that will work fine for 2560x1440.

 

[willow]

For the price of the 2 adapters, I think I'll look for a 2nd 650TI Boost & do SLI.

Thanks for your input.

 

[unrlmth]

For the price of the 2 adapters, I think I'll look for a 2nd 650TI Boost & do SLI.

Thanks for your input.

Make sure that you can use the outputs from two cards for SLI. I know when I tried xfire a while back you could only use the connections on the main card.

 

[houkouonchi]

Get this adapter:

http://www.amazon.com/Accell-B087B-...970&sr=1-3&keywords=accel+dp+active+dual-link

You can still overclock. I couldn't get 120 Hz out of it but I was able to get 100Hz with my retina macbook pro which does not have DVI out.

That specific accel one that actually says its rated for 330 Mhz pixel clock (the one with 3d support, it can actually do 400+) should be able to net 100Hz or better.