![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
Crashsector
[H]ard|Gawd
- Joined
- Jul 10, 2001
- Messages
- 1,125
This is some left over equipment from work (as always).
Teletronics VERSA Series Wireless Router
This was the router at the heart of the operation. More information can be found at http://www.teletronics.com/CPERouter.html. The box shown on that page is slightly different than the one I have. The lid on the one I have just screws on at four corners. A Netgear PCMCIA NIC is included, as you can see in the NIC. Check out the product page for more information. Apparently this is running a straight Linux kernel and it is used to control access from customers. It has a CF slot (with card) that I assume is used to keep either the firmware or a file with the customer logins/IDs. It also has a console port. I haven't had any time to mess around with it. It also doesn't have an AP with it (see below).
$100 shipped, OBO.
Teletronics EZ Bridge 100mW
I have three of these available. Two are set as a bridge, and one is set as an Access Point. However, all of them can be set to do one or the other. They all work, I've tested them. They have 100mW transmitters and use Type N connectors. They have been reset to use their default firmware and are pretty slick little units. All three work (only) with Power Over Ethernet. More information here: http://www.teletronics.com/ezbridge.html.
$60 each shipped, ask for combo discounts.
Generic Power-over-Ethernet Injectors with AC converters
Again, three of these are available. They are required to use the EZ Bridges above. Pretty standard stuff.
$20 each shipped, ask for combo discounts.
TRC-9006 Telephone Remote Controller
Now this is pretty slick. It is used to dial in via modem and turn the attached power ports on or off. I have no idea HOW it works, but I do know that it DOES work. The only information I can find is here: http://roccoc.worldtrade888.com/website/postings/PostingDetails.cfm?PostingID=2995&Language=GB. It comes in an open-ended project box as shown.
$40 shipped.
I prefer payment via PayPal. eChecks will hold shipment until payment clears. Items are shipped via UPS Ground unless otherwise specified. Just PM me here if you're interested, but my email is andy at crashsector dot net. Thanks!
Teletronics VERSA Series Wireless Router
This was the router at the heart of the operation. More information can be found at http://www.teletronics.com/CPERouter.html. The box shown on that page is slightly different than the one I have. The lid on the one I have just screws on at four corners. A Netgear PCMCIA NIC is included, as you can see in the NIC. Check out the product page for more information. Apparently this is running a straight Linux kernel and it is used to control access from customers. It has a CF slot (with card) that I assume is used to keep either the firmware or a file with the customer logins/IDs. It also has a console port. I haven't had any time to mess around with it. It also doesn't have an AP with it (see below).
$100 shipped, OBO.
Teletronics EZ Bridge 100mW
I have three of these available. Two are set as a bridge, and one is set as an Access Point. However, all of them can be set to do one or the other. They all work, I've tested them. They have 100mW transmitters and use Type N connectors. They have been reset to use their default firmware and are pretty slick little units. All three work (only) with Power Over Ethernet. More information here: http://www.teletronics.com/ezbridge.html.
$60 each shipped, ask for combo discounts.
Generic Power-over-Ethernet Injectors with AC converters
Again, three of these are available. They are required to use the EZ Bridges above. Pretty standard stuff.
$20 each shipped, ask for combo discounts.
TRC-9006 Telephone Remote Controller
Now this is pretty slick. It is used to dial in via modem and turn the attached power ports on or off. I have no idea HOW it works, but I do know that it DOES work. The only information I can find is here: http://roccoc.worldtrade888.com/website/postings/PostingDetails.cfm?PostingID=2995&Language=GB. It comes in an open-ended project box as shown.
$40 shipped.
I prefer payment via PayPal. eChecks will hold shipment until payment clears. Items are shipped via UPS Ground unless otherwise specified. Just PM me here if you're interested, but my email is andy at crashsector dot net. Thanks!