DVD-Shrink Problems

[skinegibbs]

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1017), size=48128 bytes, created 11/12/1998 1:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
Nero API version: 6.0.0.9
Using interface version: 6.0.0.0
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <TOSHIBA ODD-DVD SD-R5272>Version: 1030 - HA 1 TA 0 - 6.0.0.9
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y250P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1600LB-22EDA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TOSHIBA ODD-DVD SD-R5272 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CDWRITER IDE5224 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 3 ID 0 DMA: Off
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 249MB (255532kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1




I keep getting this error. I tried replacing the DLL afterwords , still no luck , figured i should probably ask before i have extremely nice coasters.

 

[skinegibbs]

neeeeddd heeeeelp please.

 

[Matrox462]

When does the error occur? Do you have it set up to burn directly with Nero? Try disabling it, and see if you can just make a standard ISO image file. If that works, you can just load Nero, and tell it to burn the image to disc manually. (that's how I do it, since I don't use Nero) You might want to try and see if there are any firmware updates for your drive. And finally, are you using the latest DVD Shrink? Version 3.2 just came out a few days ago. Good luck!

 

[skinegibbs]

It occurs at like the last 2 minutes of the burning. Ill check out trying to make it an ISO and whatnot , same with the firmware.

Thanks for a response.