Can't setup Cisco Router

[pug]

When I boot up the router this is what I get? I wanted to get one to play around and to hopefully help me study to get my CCNA.

If I hit enter it does nothing, if I type yes or y it does nothing.

 

[Darkstar850]

Hit "n" to go to the CLI.

 

[alrox]

Usually when the console isn't accepting input, but is displaying output, you need to turn off all types of flow control from within hyperterminal.

 

[NetJunkie]

Usually when the console isn't accepting input, but is displaying output, you need to turn off all types of flow control from within hyperterminal.

Correct.

 

[pug]

Thank you!!!

FIXED, and for those interested in what it is..

Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-I-L), Version 10.0(6), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1994 by cisco Systems, Inc.
Compiled Tue 25-Oct-94 19:25 by dougs

ROM: System Bootstrap, Version 4.14(9.1), SOFTWARE

Router uptime is 4 minutes
System restarted by reload
System image file is "igs-i-l.100-6", booted via flash

cisco 2500 (68030) processor (revision A) with 16380K/2048K bytes of memory.
Processor board serial number 01445676
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
Bridging software.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
Authorized for Enterprise software set. (0x0)
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2142

 

[BrianTaylor]

As soon as you set a startup config it wont ask you that anymore.

Until then just type 'n' or 'no' as stated above.

Brian Taylor