Never did post pics of this, and I'd sold it off a few weeks back, BUT...here ya go!
(Note that I've used multiple case badges at various points, and moved them about some to try different looks)
System is an Aspire X-QPACK (black, windowless) with a Jetway A210GDMS-Pro motherboard. This is the model with the onboard ram to boost integrated graphics performance (and it definitely does - I broke 2k in 3dMark03 with the integrated graphics). There are 2 fan regulators in the system - a rheostate device for the CPU fan, and a 4-way splitter for the 120mm fan (it takes a 4-pin molex and divides it into 2x 3-pin 12v fan molex adapters and 2x 3-pin 5v fan molex adapters).
Case Pictures
Front
Note that I have performed a case mod (well, three, actually):
And some basic painting:
System last was (at time of sale):
(Note that I've used multiple case badges at various points, and moved them about some to try different looks)
System is an Aspire X-QPACK (black, windowless) with a Jetway A210GDMS-Pro motherboard. This is the model with the onboard ram to boost integrated graphics performance (and it definitely does - I broke 2k in 3dMark03 with the integrated graphics). There are 2 fan regulators in the system - a rheostate device for the CPU fan, and a 4-way splitter for the 120mm fan (it takes a 4-pin molex and divides it into 2x 3-pin 12v fan molex adapters and 2x 3-pin 5v fan molex adapters).
Case Pictures
Front
Note that I have performed a case mod (well, three, actually):
- The grill over the rear 120mm fan I have removed. Purpose - the 120mm fan 'stock' was an exhaust fan. This sucked air in the side vent holes, and got everything dusty as HELL. No good! I changed the 120mm fan to an intake, and removed the metal grill to put in place a plastic grill/filter system (the filter is easily removable and cleanable). The interior of the box is now at positive air pressure, and as the only intake is through the filtered grill....well, it stays a LOT cleaner!
- A simple plastic duct is mounted over the PSU exhaust blowing it up. Not much of a 'mod', as it simply mounts via the PSU's mounting screws, but it helps keep the 120mm - which is now an intake - from sucking in hot exhaust freshly blown out the back.
- I also snipped away some of the metal framing around the case where the video card would slide in. That way, if you have a video card with an Arctic Cooling Silencer on it (which I did), the thing will go back together!!
And some basic painting:
- The Lite-On DVD/CDRW and Mitsumi 7-in-1 reader have had their front bezels painted to match the gloss black of the case front (and X-Fi I had at the time)
System last was (at time of sale):
- Aspire X-QPACK Black/windowless w/ stock 420w PSU
- AMD Athlon64 '3200+' (Winchester) @ 2.5ghz
- 1gb (512mb x 2) PC4000 PQI Turbo ram (CL3-4-3-8)
- Powercolor Radeon X1600XT (440/1600)
- Jetway A210GDMS-Pro Socket 939 motherboard
- X-Fi Platinum soundcard
- Zalman CNPS7000B-Cu LED
- Lite-On DVD-ROM/CDRW
- Mitsumi 7-in-1 floppy drive/memory reader
- 10cm and 30cm UV CCFLs