iFreilicht
[H]ard|Gawd
- Joined
- Sep 23, 2014
- Messages
- 1,348
Ok, things seem to be going well, both Sliger and Fortron are cooperative on this. So the only thing that's left to decide on now is how many SATA connectors the PSU should have and how long the cables should be, then we can get a quote on the price.
For the SATA connectors, I added a poll to the posts on OCN and SFN, not sure if those exist on [H]. I don't suspect anyone really needs more than two, and if they do, there's always the option of using splitters. In theory, one connector on a very short cable could even be enough.
So, let's talk cables. We need to find out what lengths the different connectors should have, so it would be nice if some of you could draw up their potential setups with this PSU and try to figure out what sort of length you'd need in order for it to work out.
For a bit of orientation, these are the possible locations for the ATX12V (4pin or 8pin) and 24pin ATX connectors on all currently available 1150 mITX boards.
For the SATA connectors, I added a poll to the posts on OCN and SFN, not sure if those exist on [H]. I don't suspect anyone really needs more than two, and if they do, there's always the option of using splitters. In theory, one connector on a very short cable could even be enough.
So, let's talk cables. We need to find out what lengths the different connectors should have, so it would be nice if some of you could draw up their potential setups with this PSU and try to figure out what sort of length you'd need in order for it to work out.
For a bit of orientation, these are the possible locations for the ATX12V (4pin or 8pin) and 24pin ATX connectors on all currently available 1150 mITX boards.