There are any number of 4 2.5" disks to 2 3.5" bay converters. These are, simply put, made for the past when 12.5" disks had any significance. Today you either want a 15mm high 2.5" disk for mass storage (5TB ATM) or you want 7mm high SSDs. So... is there a thingie which allows mounting 3 thick HDDs or 6 SSDs in two 3.5" bays?
Some clever engineering would allow 7 SSDs because that's only 49mm vs the 50.8 of the two bays but that's perhaps too much to ask for
I could imagine some plastic rails you need to screw to the side of the disks and then you just slide them into the bay and let gravity handle the rest for the SSDs. Sure, the HDDs would require screws but the SSDs do not really need much.
Some clever engineering would allow 7 SSDs because that's only 49mm vs the 50.8 of the two bays but that's perhaps too much to ask for
I could imagine some plastic rails you need to screw to the side of the disks and then you just slide them into the bay and let gravity handle the rest for the SSDs. Sure, the HDDs would require screws but the SSDs do not really need much.
Last edited: