raid 0

So all, I'm having an issue expanding a newly built raid 0 volume (3 x 500GB M.2 NVMe drives) which I placed a Windows system image from the original 1 TB m.2 NVMe drive. I am running across a problem where I am unable to expand the main partition (C) as there is a Windows recovery partition...

Hey everyone, Hoping someone may be able to provide some guidance here as I am in uncharted territory. I recently accidentally broke a Virtual Volume running on an ARECA 1882IX-12 and as a result I am no longer able to access it (obviously) as well as the other two volumes that existed. I have...

I am using an adaptec 6405E sas controller with an adaptec 82885t expander card (connected with a sff-8087 to sff-8643 cable), but the expander appears as "Adaptec Virtual SGPIO" both in the controller utility before boot and in arcconf command line utility (when I list slot configuration using...

Hi everyone, I'm new in this forum, and I have a huge problem: I bought an HighPoint SSD7101A NVMe RAID controller (PCIe) for my hackintosh (a PC with Mojave running). I built a first raid with 4x Sabrent Rocket NVMe 2TB. After made the raid-0 via WebGUI and formatted in HFS+ in Disk Utility...

I'm wondering if it's possible to raid 0 an m.2 sata drive with a sata ssd I bought a 500gb 850 evo m.2 (used) and i also have a normal 850evo of the same capacity, so i was thinking on making a raid 0 array with both drives