Appreciate all the info. I replaced the cables long ago with higher end cables I had. I used to work at an audio video shop many years ago. I too thought something was odd that the rear channel went out but when I switched audio cables, sound card and ever tried a completely different...
Dumb question but can the Klipsch speakers be run on a normal AV receiver?
I just threw out the subwoofer because my entire rear channel was gone and the sub was sitting in my closet for years.. If there is use for the 5 speakers, I'll keep them, but if not I guess those will go in the trash...
Gainesville, VA.
I see you are in DC, you're about 35-40 mins from me. Feel free to come up to my house and pick it up if you want it... I've been working from home all week doing training, so were here..lol
-Nigel
Can the universal optical drive cover work with the v350?
Everywhere I look it doesn't appear so yet, I found this picture of someone who did it...
Just wondering if anyone has done so?
-Nigel
I'm cleaning my basement and found this tower... untouched, never used or installed anything in it, still has hardware box inside. I completely forgot I owned it... Now looking at it, it's just too large for me to do anything with it. I have a NAS device so there is no need for me to load...
Thank you for the information! This is very helpful and I have a couple of questions.
I've never cloned a HD before, normally I just wipe and re-install. However, I have a laptop which has Mercedes Benz software on it which can not be re-activated. If the harddrive fails the laptop is...
Forgot to update. So everything is working great. Even terminated the outside line coming in so I can call Verizon and have them switch their ONT box to Ethernet rather than Coax since I don't want to use their router anymore.
The one cable I thought was broke earlier isn't. I ended up...
Sweet appreciate it! I'm in Virginia.
So after crimping the connector and punch down to one of the rooms I get zero indicator lights... I'm pissed cause it's in the bedroom so running a new cable is out of the question unless I start ripping drywall up. I did use a tone tool on the one cat5...
Everything I do is the 568B standard, never the 568A. So when I started terminating the ends naturally I started doing all B. I haven't use A in such a long time that when I first looked at how it was wired in my house I was like they did it wrong...lol Call it old habit I guess but I just...
Wanted to ask before I either changed everything or keep it the same. I have multiple cat5e runs in my house. The ones I wired are the 568B standard. The ones that the builder did before I bought the house are 586A standard. My question silly as it is...
Most patch panel cables are 568B...
I don't think water would be an issue of getting inside the box.since it would be covered. I could always seal the exterior of the distro box which I think would be best in this case, just as another layer of protection.
Hell, looking at how they did the phone line the technician just twisted...
Yep, that was exactly what I was going to do. I already have the small 3' cable that I terminated on the ONT box on the left, I just wasn't sure if a coupler would be the best solution here. I thought about soldering the ends but I can't imagine that being good for the signal or it would...
We have FIOS and just recently returned our cable boxes so I want to eliminate their horrible router from the house. On the side of the house is the ONT box and a few feet over we have a main feed line that goes to the basement which I already have wired up to most rooms in the house via cat5e...
I'm not undestanding this as far as wiring my fans up.
I have 3 fans that I want to run off a solar panel that is putting out 5watts of power and is rated at 12v. The raw output of the solar panel is up to 21v and when I hook a load up to it, IE: A fan it significantly drops down in...
Figured I'd ask.
Are there any fans out there that are more than 12v input?
I ask because the solar panel that I am looking at roughly puts out about 19-21volts.. .I'd rather not try and regulate it down and I would only need this fan in my shed so it doesn't matter as far as leds or...
I don't disagree with that at all, and I know I altered it but the thing is my ear can't hear a difference between what it was and what it is now... This cost me nothing and it works. So i'm cool with it. I would never do this to say my def tec super cube or anything like that, but these are...
I have the ultra pro-medias 5.1 which has the sub and two speakers inside, the port is the entire length in the back... That blow hole or intake (whatever you want to call it) is on the right hand side right where shit normally fries and gets hot via the power.. The 92mm fan fits PERFECTLY on...
Welp got some new parts and replaced it... figured I didn't want to run into this again so I did a 92mm hole on the side that is known to get hot and fry... Fits perfectly on the side. Took about 30 mins to mod.
Bass has NOT dimished much at all honestly. The thing is already more than...
Yay so my promedia ultra 5,1 sub is not powering the speakers.. at first it was fine and now all that happend was a loud high pitched now nothing from the speakers but the subwoofer produces the lfe...lol
This blows!
When I used to work at BBY I think I had the amp/sub go bad at least 3...
This is kinda car related but it's leds... so figured it would work here:
I'm not a dummie when it comes to soldering or things like that... this however is throwing me for a loop.
I have a defi control unit II.. they only put in 3 leds and so the light spread isn't great... there are...
Found my paypal transaction from 2003..lol
Ultra MRII.... I can't find shit on the net anymore and looks like everything is done with them :-(
Shame
-Nigel
So many years ago I bought I THINK an Ultra MRII....
Problem is I can't find any markings on this fan controller or name or receipt...
Here is a picture but it's a pcb board with blue leds soldered on it. Then the lian li plate is mounted on top and holes are cut out for the knobs.. I...
More of a general question when you situate your heatsink that has heatpipes do you have the fans blowing on the actual pipes if possibe? I just got my pc-v351 and was wondering which way I should put the heatsink on the mobo since I have two 120 intake fans...
I would think that air blowing...
You did EXACTLY what I want to do to the rear and make my 92mm bracket...
What size aluminum did you use? Have any extra... want to make another..lol
Looks good!
-Nigel
Just got the pc-v351r...
Just wow... I am blown away yet again with Lian li! sersiouly... I have all their black towers and love them but this red one blows them out of the water! Sorry pc-6b :-(..hahah
-Nigel
Awesome!
Thank you for the help!
I wish someone would make and produce those custom backplates post earlier... thats' the only thing that I really want on the 351 with the fan and psu swapped... I was going to get the 352 for that reason but can't stand the front of it and the rear...
Do you know the fan sizes for the front. I noticed that they have different width and want to make sure I grab the correct 120mm ones.
I am looking at the NH-C12P SE, so you think go with that rather than what you currently have?
-Nigel
What fan size is the upper right? 92mm?
Also what are the two extra fans you added? I love that!
Planned on doing the same thing with mine but never saw pics to judge!
Thanks,
-Nigel
I don't know why I can't get this to work....
I have two computer.. ( i have more but to make this simple)
My laptop, eviltakitus
My deskop: lianli2
The both belong to hte workgroup: mshome
When I am on my laptop and click on my network places I can see the desktop lianli2.
When...
I'm new to Cron Jobs... but I would like to try something to make it a little easier on myself here at work.
I have a template that I use that's in txt /text file. It looks like this:
Backup Group name1 via Legato:
-
Backup Group name2 via Legato:
-
etc..
It is only 15 groups...