I need someone to tell me why my setup doesn't work.
My laptop is connected as 192.168.100.200. Default GW is 192.168.100.4 (smoothwall firewall, internet is on the other side).
I have another firewall at 192.168.100.191 that connects to the 10.20.0.0 network.
I add static route in...
We have a PowerEdge 4400 with and 8 drive backplane with 2 drives RAID 1 and 3 RAID 5. I believe the controller (PERC 3) has failed because it fails to start at boot, so I think the disks might be OK.
What I'd like to know is if I can transfer the 3 RAID 5 drives to another identical machine...
I'm trying to setup a wireless network here at work (a high school). I've installed 18 Proxim AP-4000 PoE access points connected to a Netgear FSM7326P PoE 24+2Port Layer3 switch. Here is a quick and dirty basic diagram:
As you can see the Netgear connects to the rest of my network that...
Recently we installed an 18 AP wireless network at the high school I work for. We used the following hardware for the install:
Orinoco AP-4000 Access Points
Netgear FSM7326P Switch
All of the APs connect to the Layer 3 Netgear switch. Which is then uplinked to the rest of the network...
I work for a K-12 school district and our current hardware situation is a mess. I have HP laptops, Dell laptops, IBM laptops, Compaq laptops and Toshiba laptops. Needless to say, this makes support a nightmare. I really like the Apple hardware, and as a Maine district we have an iBook in every...
We have a Poweredge 2450 here at work that has a PERC 3/Si card in it. One of the guys in the shop pulled out one of the disks in RAID5 and now I need to know how to repair the array. If I pull the drive and stick it back in... it doesn't rebuild. Do I need to initialize the drive in the...
I work in a 650 student high school and have been tasked with putting together a wireless network.
The main issue we have right now is how to properly restrict access while also making the system as user friendly and convenient as possible.
Clients will consist of:
Personal computers...
First of all 10.10.0.0/16 is a classless subnet, is it not?
Next, if it is, can someone please help me configure a reverse lookup zone in BIND9 for that?
Thanks!
My place of business might be paying to put me through the following course. My question is, will this training be worth my time? We are currently purchasing 50 iBooks, and next year we will likely take ownership of 200 4-year-old iBooks. Will this certification make it easier to obtain parts...
Monitor is brand new still sealed in box from Dell. Unopened.
****Sold****
$435 Shipped. Payment by Money Order only.
Email: jingalls -at- downeast.net
Pic of what it looks like (mine):
At work we have a rack with 9 Amer.com SR24G2 unmanaged switches. These units have 24 10/100 ports and 2 10/100/1000 ports.
When they were installed 2 years ago we simply connected the uplinks down the stack. Now, we're experiencing a total network outage about twice per week. We have to go...
I'm going to be building a system that will have 7 HDDs. I plan to use the two headers on the motherboard for 2 drives in RAID1 and then adding a HighPoint Rocket 1520 and a Rocket 1540 controller cards for 6 more SATA ports.
Will I have any confilicts or other problems running these...
I have a dlink DCS-5300w camera and would like to be able to stream the video feed to 50+ viewers. I don't *think* the camera could handle 50+ simultaineous connections. (Wouldn't that require lots of resources on the camera side?)
Anyway, is there software that can grab the video from the...
I just put together a Shuttle SB75G2 rig (specs in sig) and my temps seem really high. I idle at ~64C and I've seen it get as high as 78C under a load. The case temp as measured by MBM are range from 43-47C with ambient temps around 23C.
I've reseated the heat pipe 2 times once using AS3...