Barton AMD 2500+

V

Viet15philong

Bad Trader
Joined
Aug 27, 2003
Messages
270
I was wonder is this an unlock cpu??? What week was this made in? The Numbers are
AXDA2500DK4D 9560458280231
AQUCA 0323TPMW
 
Originally posted by Viet15philong
So is this a good cpu to overclock??? Pluz wat is up with the one with the "F" and "Q"???
Click to expand...

good question
never seen a AQUCA, so only way to find out is to oc it
 
0339 and before are unlocked on certain mobo's kt400 and up via's and nf2 mobos
 
Originally posted by Viet15philong
So is this a good cpu to overclock??? Pluz wat is up with the one with the "F" and "Q"???
Click to expand...

What "F"?

That CPU should be fine to overclock, as long as the rest of your system is up to it.
 
depends on the individual chip... Id say anywhere from 2.2 to 2.6ghz. depending on the setup and cooling. :D

Own a vapochill? I saw one at 2.8..
 
Originally posted by Viet15philong
how fast do u think i can oc that???
Click to expand...

Less than a minute, depending on how fast you are at navigating around the bios.

Hang on, I think I misunderstood. I've got a similar chip (AXDA2500DKV4D 9377468260550 AQUCA0310WPGW) which tops out at about 2GHz, but it's only cooled by an SK6 with 80mm fan, and only an extra .025 volts. Your cpu is also 3 months newer than mine, so with the right cooling who knows.
 
The chip is unlocked but there is no way to say how far you will push the overclock. Every chip is different and what RAM/Motherboard/Power supply/cooling you use will also affect the results.
 
The ram i am use is Twinmos 2x512, NF7-S ver.2.0,Xcase 550w power supply, Thermalright SP-97with 120mm fan with led, heatsink for ddr466 ram, zalmen heatpipe for gainward Ti4200 128mb 8X, the case have total of 3-120mm blue uv led fan, 7
-80mm blue uv led fan!!!
 
wow thats way overboard on fans, hope ur psu isn't generic and can handle all those 12v fans
 
Originally posted by Tass
Less than a minute, depending on how fast you are at navigating around the bios.

Hang on, I think I misunderstood...........
Click to expand...

Priceless :)
 
Hi,
When i go to the cpu setting. I got an option to pick 2500+ or 3200+ or user definer. SO wat is up!!!
 
Originally posted by Viet15philong
The ram i am use is Twinmos 2x512, NF7-S ver.2.0,Xcase 550w power supply, Thermalright SP-97with 120mm fan with led, heatsink for ddr466 ram, zalmen heatpipe for gainward Ti4200 128mb 8X, the case have total of 3-120mm blue uv led fan, 7
-80mm blue uv led fan!!!
Click to expand...

You should get 200 x 11 with no problems?!?

For all of that high end equipment you either:

A. Don't have that equipment
B. Have a chip that is not overclocker friendly
 
You must log in or register to reply here.
Back
Top