Search results

  1. N

    DFI NF4 SLI-DR problems

    Well I ended up getting some new memory, OCZ 1GB 3200 (BH5 Gold) and it booted into Windows without problem in dual channel. After further testing, it seems that I can't boot into Windows with 1T in dual channel mode. I will try flashing the BIOS tonight and see if it fixes it, if not I will...
  2. N

    DFI NF4 SLI-DR problems

    Yeah so recently I picked up this board along with a eVGA 7800GTX and a OCZ 520W power supply. Plugged everything in, made POST and booted into windows. Not long after I got a BSOD with PFN_LIST_CORRUPT error. So I thought it could be my memory, I tested each stick in dimm 1. Which didn't work...
  3. N

    Can't get windows xp to load on new HD

    Thats what I thought at first, but then I installed Windows XP on the 120GB IDE drive and the raptor showed up in My Computer. I could copy files, to it and use programs off of it. Also when it was installing XP to the raptor, I could see the files from DOS after it was finsihed. It just doesn't...
  4. N

    Can't get windows xp to load on new HD

    I recently got a 74gig raptor and decided to make it my boot drive. I connected the drive to the SATA 3 port, and it was recognized in bios. So I put in the windows CD, loaded the raid drivers, and formatted the drive. Windows copied all the install files over and restarted. So here is the main...
  5. N

    Quick question about power supply

    I just got an antec true blue 480watt power supply. Put it in with my new computer, and checked the voltage rails. My 12V reads at 12.576V, is this good or bad? Should I send this back or contact Antec, don't want the power supply to kill my PC. Thanks --Seph :D
  6. N

    Need help building new PC!

    Well I looked around for the Winchester. I can only find it on eBay, and it doesn't look too expensive. I will try and see if MemoryExpress has it, and I hope they do. About the ram, I figured I would switch from the OCZ and go with Corsair 2x512 3200XL with the 2-2-2-5 timings. Also I figured I...
  7. N

    Need help building new PC!

    This will be my PC. I will be buying most of this stuff from NCIX. Although I might buy the RAM from Vibecomputers since they seem to actually have it in stock. Do you know of any Canadian retailers that have the 3500 with the Winchester core, I see newegg has it but I am sure they don't ship...
  8. N

    Need help building new PC!

    It was the familys PC, so I have no idea since I never use it. But somehow none of them would work when I tested them. --Seph :D
  9. N

    Need help building new PC!

    Everywhere I look the MSI K8N Neo2 Platinum is on backorder. Also I can't seem to find this Winchester CPU. Newegg has it, but do they ship to Canada? Also will it cost much to bring it over the border. Final question, which 6800 is the best? I was thinking of getting a Leadtek. --Seph :D
  10. N

    Need help building new PC!

    Well my 2nd PC died, the motherboard, CPU, Video Card, and RAM are gone. So now I am looking to get a Athlon 64 system. I have been out of the loop on PC hardware for more then a year so I need a little help. So far I am thinking of going with the following: Athlon 64 3500+ NCIX ASUS...
  11. N

    Overclocking problem!!

    I can go much further. It booted into windows at 227FSB, but my temps were way too high(another problem) so I clocked it back down. I ran it at 217FSB up until my fan died, then I got this problem and couldn't overclock at all. --Seph :D
  12. N

    Overclocking problem!!

    anybody? --Seph :D
  13. N

    Overclocking problem!!

    Well I now have a huge overclocking problem. I recently had a Panaflow 92mm Fan blowing on my SLK-900u. It died and my PC restarted and made couple of beeps(it didn't post just shut off). So I went out and got a 92mm Tornado, put it in and booted. Sounded like a police siren. So I reset the...
  14. N

    Klipsch 4.1's + Audigy 1 or Onboard Soundstorm?

    Which would produce better sound? I have an ABIT NF7-S, and I will use the Klipsch 4.1's and Plantronics Audio 90's. Thanks in advance --Seph :D
  15. N

    Corsair 3200LL question

    I have a 512MB stick of Corsair 3200LL Platinum in my ABIT NF7-S, with a Barton 2500. I am wondering if people can get the timings down to 2-2-2-5 at 200FSB. I have tried and I can't get it to run windows even at 2.8V. Have it at 210FSB now with 2-2-3-11 timings, so I'm wondering if this is the...
  16. N

    PC won't post, dead mobo? video card?

    Well i set up my epox 8kha+ , 256mb micron 2100 ram, Hercules 3D prophet 4500, athlon 2100+. I power it on, and the fans start spinning and everything. I don't hear the post beep, I cant turn it off from the power switch, and nothing appears on the monitor. Also the fan on the video card is...
  17. N

    Upgrading questions

    bump --Seph :D
  18. N

    Upgrading questions

    First time posting since my account got deleted a while back, and I have a couple of questions about upgrading. Which ram should I be getting for my new ABIT NF7-S, and 2500+? I can either get the Corsair XMS LL 3200 512MB, or the OCZ LL Platinum 3200 512MB for the same price. For those that...
Back
Top