Search results

Totally 100% agree, more just a monetary issue at this point since the original pc was 2k and its upwards of 4 at this point with new parts and technician fees. So trying to weed things out and do my best to stop bleeding haha. For safety its a really good idea though. After trying a few more...

Thanks Vick, Will look into it some more. I was looking into best buy as they are the only ones i could find quickly that have a good return policy on batteries. Also I've never had a UPS before do they all clean the sine waves or do i need the similar to the specific one you showed me before...

Ya the screenshots weren't the best examples compared to the footage. Should have posted something better. I made a couple new videos over the past few weeks as i got back to trying to fix this pc. Remember also the image looks about 10 times worse on the monitor vs the internally recorded...

I don't have a second monitor, but i've bought and tried 5 now 1440p 144fps monitors. All of which look like complete garbage with my pc. You think going up to 4k 10 bit Dell Ultrasharp or something even with the lower refresh rate would possibly create a less completely gross mushy image...

I havent tried underclocking the GPU or tried overclocking due to my fear of breaking something. If you have a good guide or something i can follow to give it a try i will do it and report back the findings. Also check out these new videos and let me know if that points towards something! In the...

Been awhile! Thanks for the help again. I got a bit fed up with the PC and ended up just collecting dust in the corner of my room for the past few months so I could attend to other things. Now im back and continuing the testing. So to answer your last question. I looked into the UPS link...

I truly do think there is some scaling issue going on as certain assets in games appear low resolution while other appear nice and crisp. As far as scaling things in windows, i pretty much flushed it out in the beginning using settings i found online, but scaling is just at 100 percent i believe...

Ok, after some work I have some interesting results after trying what you very well explained. I recorded footage of all of this also when it came to the LOD issue. Heres what i tried during these tests: If i change the HZ rate from anything besides 60hz the issue comes back. Basically if i...

Awesome, thanks! I will try this out tonight and get back with how it goes afterwards. I will also show you how i had my contol panel setup as of late. Once again base config also showed same issues. I will plug in all of these stats and drop the hz rate. I agree to, looks like an LOD issue...

Totally agree. I tried to do my due diligence and the first PSU i landed on which was the RM750 Corsair, the very week i built the machine i brought it to the local professionals who said they thought the PSU was ok. The following week it passed away haha. RIP. I replaced it with another 80...

Ya i can hear you there. Although remember what i see on the 27 inch monitor looks bad enough to go through all the trouble of multiple builds and posting on a forum for the first time in my life ha. Something I'm not sure i mentioned earlier that has sort of scarred me through this process is...

Thanks chameleoneel! Ofcourse i'd never sell ram that is potentially bad (only after RMA). The ram is only 16 gb two 8 gb sticks btw do you think going for 32 would make any difference in gaming? If i do go down that road? I read that past 16 doesn't net much and the speed of the ram means more...

Good mention on running the OS from the thumb drive, thats one i haven't tried yet. My window to replace the SSD has expired with Micro Center atleast so i just left it alone, but i havent been able to rule that out entirely yet. On the Ram side i did run Mem test a few times always netting 0...

Very high chance within the next week, i will purchase the one you guys showed me. Even if it doesnt fix the issue i like the idea of clean waves going into my PSU. Does it generally help with coil whine in anyway because mine has been pretty angry lately?

I thought maybe roadhogs belly had bad low poly textures? Thinking back on that specific picture though blizzard aint that good with high detail, since they prefer those cartoon WoW type characters so every PC can run it. So maybe his belly was suppose to look like that. All the text to in...

Thanks for the tip! I used the gamebar to capture the new footage but it came out all garbled or wouldnt read properly in premiere pro. So all footage captured i used the newly installed nvidia experience. I think it only recorded it at 60p though when everything was set at 144hz. I will go...

Thanks for the interest! Ya im just trying to get to the bottom of all of this. Has been such a long journey. Heres a couple quick pics of inside of my PC and PCIE cables run to the PSU as i was building it. Will try and get some more high quality pictures ASAP. Also, figured it would be smart...

I will definitely bring the build to my friends house when hes around again and pull the PC out of the case to rule it out! Thanks for the INFO. Ok after rendering for hours haha. Heres Some Footage with notes and i also recorded 3d mark so all can see. Watch in 1440p. EDIT: SO JUST WATCHED...

Totally AGREE, Just so everyone knows where im at im currently encoding screen captured footage through windows since i did not know windows had it built into the game bar. I found out the hard way though bringing it into premiere that the video is half green at the bottom for some reason so im...

OH, Test Bench. Personally i haven't but Micro Center claimed to pull the board out of the case and have it running well. I'll probably end up doing that very soon if i decide to replace the RAM since its stuck behind the cooler. I have turned off most settings within games and turned them on...

Yes sir all the same Lian Li Lancool Mesh 2 Performance Case. It did cross my mind is there some way for the case to wreak havoc? Board is on all ATx stands but IDK. Yes i've benched all of the builds with 3d mark and heaven mostly. 3d mark im usually pretty close or right under average. Heaven...

Yes so the tests at my friends house last night was literally everything brought with me, monitor,computer,keyboard,mouse,speakers and even the surge protector i sometimes use. I think things might have been slightly better at his house especially after today turning the PC on again at my house...

Looks like a beauty. Would you guys go for replacing the ram sticks with lets say corsair vengeance first or buy the UPS (how long does the battery last in terms of lifespan?)

Micro Center claimed to have tried an AMD card but they spent like an hour working on the full diagnostics so i dont really trust that lol (i wasn't there to see so only Nvidia i have personally tried). Lol ofcourse thats what it feels like at this point.

Yes I've moved the computer around my house to multiple different outlets and with and without surge protector. Then last night i drove 10 miles with the PC and plugged it into my friends house which maybe it looked a tiny bit better, but might be placebo. Pixelization and stuttering was still...

Oh my bad let me see if i can clear it up with the info i have. So currently im using the LG-27gl83a-B and it came with a DP cable and an HDMI cable, i have tried both cables the monitor came with and my heavy duty HDMI cable i use for recording 4:4:4 high bit depth video ( 8 bit 10 bit 16 bit...

Haha. Anywhere you can point me to? The paid "Professionals" cant figure it out and agree the problem exists.

No key, but Windows lets you download and setup windows 10 64 without needing a key you just end up getting a watermark in the bottom of your screen that says "Activate Windows" so every build i went to the official ISO website and downloaded whatever the latest edition was. Heres the link...

So, i had the exact same thought, so the Ram sticks have been run through MEMTEST for hours ending up with 0 errors at the end. I also pulled one stick and tried each alone. I do agree with you though, was on my mind as maybe trying to return the GSKILL and going to Corsair Vengeance or...

So I with every build reinstalled the Windows USB ISO for the most current Windows 10 64 bit verision, so no it would be whatever the current windows version is on their site (unless they havent updated it). Ive heard the exact same thing about 1909 by the way, good mention. When i was having...

I will definitely look into this! I just got back from my friends house and had my computer running there for about an hour and what i was able to see is maybe it looked visually a tiny bit better? Although it was hard to tell but the pixelization was still 100 percent there along with some...

I actually sent my original 3900x back to AMD and they replaced it with a new one for this build and all the issues stayed so wasnt the cpu hardware wise. I tried everything at the original ram speed set by bios (2133mhz) and after seeing the same visual issues i turned docp on (3600mhz) which...

Ok ill look into that. Is there anything in ASUS Bios that could create unstable voltages? Also by the way havent tried this yet but going to drive 10 miles away to my friends house right now and try it at his house to rule out my house as a possible power problem. Will report back in a little bit!

Oh also to add to that, EVGA when they got the card after giving me the replacement told me today that the original card passed all their tests and that it was fine. So apparently I replaced it for no reason haha. Thanks for the help

No I've used a surge protector strip and straight into the wall both of which dont change anything (do you need to buy a UPS nowadays just for a computer to run right?). Im using a Corsair RM850x 80 gold right now. Then the last 3 power supplies before that were RM750 Corsair, Asus Rog 750W 80...

Thats why i actually had EVGA replace the 3070 with another new one though. So basically on the current build ive tried 2 new 3070s with good drivers and the 1070 before i sold it. On the second build also brought it to a computer repair service in town on the second build and they also tried...

I did use geforce experience on one of the older builds but since then have only manually installed the current driver for the 3070. The 1070 was in the first build and i actually just sold it for 450 bucks its insane what people are paying right now. I thought similar about going backwards to...

Yes I've bought and brought back 4 different monitors now, all 1440p 144hz and on each of them have tried both HDMI and DVI (which im currently using). Also have tried the different ports on the graphics card and the MOBO itself which leads to the exact same problems. I also tried using my old...

Thanks for the response and help! To answer your questions, here goes: *Windows 10 64 bit although currently i haven't bought a key as it gets linked to the motherboard if im correct, but its official and from microsofts website and cleanly installed from usb stick (will buy a key once i know...

Current Build- · EVGA Ultra 3070 · Ryzen 3900X · Gskill ripjaws 5 3600mhz · Asus X570 gaming E motherboard · Corsair RM850x 80 gold PSU · Samsung 970 Evo 1TB M.2 drive · Lian Li lancool mesh 2 Performance case · LG 27GL83A-B Monitor Hi all, So I’ve been on a 4 month journey through...