Search results

i feel like my biggest challenge in picking a game is matching my mood to what game I want to play.

Hey All, I just put together a new x299 build with some 3200 ram and a 10940x. The only thing I did in bios was enable xmp profile for 3200. I do not see my cpu ever getting to turbo mode, cpu-z shows +-4.1mhz. ( this is weird because non turbo should be 3.3 and turbo should be 4.6) and...

Had this issue too, you can quicksave if you get stuck. load quicksave then the mission objective will change.

what would u get for low cl high speed? most high speed I see has larger timings

annnnd heres a pic

Thanks a lot guys! this gave me a bit of confidence when putting everything together. EVERYTHING WORKED and ram is running at 3200mhz! I guess I was just worried because I had absolutely NO luck with that same ram on x99.

Hey guys, I was wondering if you think trident z royals 3200 will work with the x299 asus gaming mobo. On gskill they only have the 3000mhz listed for working with x299. The motherboard supports speeds well above 3200mhz. Do you think the 3200's will work even though they arent spec'd for...

ooook fixed it properly :) (yes ino i need to work on my rgb config)

thanks guys, i figured this was too ez to be acceptable lol. Just ordered a proper modular cable now

So im that guy who gets a 3090 and forgot about getting an extra 8pin for my modular psu (850w corsair). Could this ghetto rig work? Step 1- Two molex to 6pin: https://www.microcenter.com/product/409236/kingwin-8-dual-4-pin-to-6-pin-pci-express-extension-power-cable Step 2- 6pin to 8 pin...

it would make more sense if the wattage usage chart DID NOT have a 3090oc on the list. And also if ur gonna bring the 3090 comparisons to fps, what would a reasonable negative point be to having a 3090oc as a fps comparison. just better overall data analysis.

I get it, ok that gives Jayz a free pass. though wtf nexus?

Yo guys, Is it just me or anyone else thing this is weird? JayzTwoCents does a comparison though does not include a 3090, which would always be on the top for the comparisons on his benchmarks and if were comparing the best new cards from each company, it should be there...

if its wordpress, secure the fuck out of it. gdamn injectors everywhere.

doood. you need to set $r2 ONLY if the condition doesnt meet. so probably in an else. the condition is saying, if $q2 is not set, do something. But then its using the $q2 in the mysql_result method EVERY TIME, that wont work if $q2 is not defined. *ALSO, as a code organization tip. create your...

print your ".$menus." to make sure that is a value. That value should just be the file name. It looks like that line is breaking if you are not getting anything in your menus db after upload. Try to wrap code that you think could be breaking in try/catch. Also just try hard coding the ".$menus."...

eh their stock situation is not really reflecting that. look how it significantly dropped when they pulled the move. ino its stocks but i think it shows something.

this is silly. Content output dropped from the rona so the move is to charge more? I will say the latest chess series/ barbarians / evil has been great. but it doesnt make up for the months lul we had and justification for price increase. This meme is getting more accurate every day:

Yoo, Anyone have experience ordering from modDiy.com? I placed an order last week with something that they said was in stock and have not gotten a shipping number or anything other than a receipt. I live in California. If you have done business with them, how was your experience? t[H]anks

u guys seen this? same temps, cleaner solution, can control dew point a lil better:

"im sure some people play bfv" hahahaha

I got a decent laugh out of this one: Anyone end up in that situation?

I get what your saying, I wonder if I would be more comfortable with soft tubing because I make a lot of recirculating hydro systems and im used to all the barbs and compressions lol. jkjk i just need the look of hard tubing. though on the reverse, I bet it would be easy for you to make a...

thanks for posting link, sorry I forgot!

dood thats it! I even came across that website during research but I didn't find the rite combo, I saw 2x15, 2x6, 2x8, etc.... Thanks a lot!

I was thinking the same thing as a worst case :) also looking at the design and seeing most usb 2.0 cables are like that I guess it makes since why there aren't any 90 usb 2.0 adapters.

Oh also, I just came across this: I do have a spare bottom pci bay available, I might just stick that in.

Ah thanks guys, I ended up just not using the back panel and having the ssd's sit ontop of psu. I plan on printing this to keep it looking nice: 3d printed duel ssd holder Also I think it makes working on the pc easier since when you open the back panel you dont have your drives connected to...

Im wondering about this too, I dont have rgb headers on my mobo but I got some parts that use them so I was hoping this controller could control their led's

ah thats a valid question. This is my pc, I have a usb 2.0 hub in the back and it has this thick sleeved cable that plugs into the mobo. As you can see it sticks out a lot(same with mobo headers and 3.0) Im looking for 90 degree adapters for all 3(I got the 3.0 and the mobo header one already)...

Hey guys, Im just looking for an internal usb 2.0 90 degree adapter that faces downward. I CANT FIND ANY! there are hundreds for 3.0 but the only ONE I found for usb 2.0 is angled upward. like this...

thanks dood, I like the cpu block and the blue looks really good in that thickness!

pic? :)

yo thanks for the pic, that does look really good! is that petg or acrylic?

sadly, my budget only accounts for the overhead of bends and not the $9,999,999 worth of extra fittings :(

per research a bend vs a fitting does not affect performance. Just curves overall affect performance, which only determines what pump power you need. Im performance driven and thats why im asking this question because it comes down to aesthetics vs performance. soooo with that in mind, what you...

Yo doods, if money was not an issue and you only care about visuals, how do you feel about 90degree fittings to create bends vs bending tubing? Ive seem some cool examples with fittings then when I go back to look at bending builds they look a bit plain. You guys think im just personally...

Hey All, Was wondering what your opinions on tubing size is? I was thinking 14 or 13mm, though without any real logic just feeling. Does anyone have a good resource that shows setups with different tubing sizes? its kinda hard to find since alot of people dont post tubing sizes lol. Thanks

Hey guys, Wondering if anyone had any tips on installing an ssd on the lian li 011 backplate (5-6-7): The problem that im having is that the ssd lays pretty flat and close to the metal of the backplate so its really hard to plug in sata power, not enough clearance. Do I need to get thinner...