Search results

Not yet, but I can only imagine how laggy it would be. I'm on A12 PixelExperience right now, and planning to roll back to the previous ROM because the UI is just too unresponsive in comparison. Update: Good news, you can easily downgrade to A11 again from A12. I reverted to crDroid v316, it was...

I figured it out. While the TWRP screen was bootlooping, I used a USB cable and ADB command "adb reboot bootloader" to get into bootloader mode. Then the only thing I found that would kick me out of the recovery bootloop was to select "Boot to FBMI" which I am not sure what that is, but it did...

I just double checked and I think I'm having the same issue as you now. I was able to reboot to TWRP 3.5.2_9-0 with no issue, even after installing A12 rom but before creating a PIN code to unlock. But after doing that, now TWRP just bootloops. So it does appear that the encryption in A12 causes...

Thanks again Crimson. Just wanted to report to everyone that I got A12 installed and working using the link I posted in my edit to my previous post. Since I had already installed the 6gb international and got up to A11, all I had to do was reboot to TWRP and flash the .img of the A12 "Plus"...

Thanks Crimson, looking forward to it. Looking at that link you posted, I recognize this as a file I already flashed on my Xneo a few months ago, which allowed me to flash A11 crDroid with 5ghz working. With that said, do you know if I can skip flashing the international again, and go straight...

Thanks CrimsonKnight I appreciate your historical hard work on this project. I must've missed that, thanks for bring it to my attention. Do you know where this person obtained the "6GB modded global rom" I am not certain of where this is stored but would like to try it. Or perhaps pjrodriguez...

CrimsonKnight13 or anyone, do you think there's any chance we'll get Android 12 on the XNEO? Currently crDroid is up to A11 and releases stopped 2022-03-20. I was hoping for a little more security and feature updates from this tablet, before it's considered dead to updates. Also just a side...

Thanks for sharing this information! I wonder how it is still going for you a month later? Also, what benefit does the HW+ decoder provide? Update: I flashed the newest crdrom-v302-210315-arm64-bgZ today, and I am seeing that it does detect and join my WiFi 5ghz network. I had trouble with...

I have this issue too, especially when swiping from the screen edges in fullscreen mode. There are reviewers on youtube who have also mentioned this issue. It is an issue across multiple ROMs, so I believe it to be hardware related.

Quick question: Has anyone achieved 5ghz WiFi on any custom ROMs yet? I see CrimsonKnight mention that the "New kernel & vendor do not allow 5GHz WiFi on GSI", should I interpret that as no GSI ROM will (probably) ever allow 5ghz WiFi?

Back to report that I've been using the tablet rooted for a week now, and I've settled on CAOS rom. It is the most stable with least issues than othe ROMs. Second up was crDroid, especially with the built-in ROM customization tools, but they did not compile a Gapps compatible version, which I...

Updated above post with new information. Side question, do you know what the difference is between a "bvN" and a "bgN" version of a ROM? Such as CAOS

Looking good! As I was going through the process, I took a few notes, and detailed the steps for flashing a ROM. You might find this useful to add to the guide, and a new section at the end for "Flashing ROMs" Boot shortcut keys Flashing ROMs: Flashing anything inside TWRP Known Issues so...

I tried a couple more ROMs, Bliss and Bless, however the system crashes when joining any WiFi network. I reverted to CAOS for now, and searched for the Magisk module you mentioned. I think it's called "Wifi Bonding (Qcom)" and says it "Doubles your wi-fi bandwidth by modifying...

Confirmed that these ROMs only show 2.4ghz networks, no 5ghz in list: caos-v221-200725-arm64-bvN.img bliss-v217-200602-arm64ab-vanilla.img losq-v221-200728-arm64-bvN.img.xz I wonder if there is something specific to this chip that requires special drivers to recognize 5ghz...

Thanks, and I agree the DRM is moot for me, with Plex/Zion, and a Shield for my TV that does Netflix, etc. Thanks for the tip on disabling DRM though, I might have ended up scratching my head eventually when I loaded Plex. I was able to install Gapps and Magisk just fine on LineageOS 17.1 GSI...

That is certainly confusing lol, but I do grasp what you mean. I'll give this a try with Magisk and Gapps. I was able to boot into LOS 17.1 GSI just fine. Looking through everything, it seems to work as expected, except for one issue: WiFi seems to only detect 2.4ghz networks. None of my or the...

Curious, it's not a good idea to flash LineageOS with TWRP directly? I can do it with fastboot, but if TWRP is not a good idea for a specific reason, I'll make note to myself in my ROM folder so that I don't make that mistake in the future. Excellent, glad to hear it is this easy. I've had a...

Updated above message. New messages below: 1. I do want the English LineageOS flashed next. Do I need to flash the international version again so that the ROM is in English, or can I go ahead and flash Lineage right now? 2. Going to need Magisk too, I assume I need to boot into a working...

Update: I wrote a post here earlier with an error, but resolved it with a computer reboot. MiFlash did flash the firmware using the settings you posted above. For the guide on this, if someone encounters any errors with MiFlash, try rebooting, and possibly a different USB port if possible. That...

Thanks, so I've tried that and ran into a different error this time. Screenshot of setup, and provided whole error log in codeblock below. 2020-08-02 10:21:31.992 Validating Application Configuration 2020-08-02 10:21:31.998 Load APP Configuration 2020-08-02 10:21:32.010 COM:0...

I'm going through the process today. Notes as I go along: The link in step one to "Chinese 20200522 firmware" is a copy of the link for QPST before it. (I did find it in your Mega folder however) A step should be added just before #11, mentioning powering down the device before holding all...

Great! I'm happy to expound upon the documentation when I go through the process myself. Anything to help bootstrap this project. If it's assessible to more people, perhaps one day we may even have custom ROMs and kernels.

Thanks for all your hard work on this! I just received an X Neo yesterday, and found this thread while looking for a rooting/lineage method. Would you be willing to write a brief step by step on getting twrp, magisk, and lineage going? Just the highlights, I can figure most things out contextually.