Search results

How is the future support of this cooler? Will we get a new bracket for AM5 or newer Intel sockets? This is the only thing keeps me away from purchasing this cooler and DAN A4 case.

I will order the DAN HSLP-48 cooler as soon as it comes out. However in the mean time, I need to get a cooler for my Ryzen build. Since both NH-L9i and NH-L9a are compatible with AM4, which one do you guys think I should get for my Ryzen build? Is there any difference in performance between those?

dondan : can you confirm that the Sapphire R9 Fury will fit inside DAN A4? It's a dual slots card and 300mm in length. SAPPHIRE Tri-X Radeon™ R9 FURY 4G HBM-SAPPHIRE Technology

That 2.5 slots were listed by mistake. 40mm in thick is absolutely dual slot spec. And its length is 300mm, not 307. You clearly don't know what you are talking about. I'm done with you now.

Check few posts above and come back here again. Caseking and OverClockersUS are "Dan A4 Official Resellers" . You expect those resellers work for free or a penny?

It was quoted in 230 EUR which equals about $255. Add tax and shipping fee on it would bring the total to the Kickstarter price.

It was my typo. I was talking about R9 Fury which he was asking about. It's big but fit perfectly. SAPPHIRE Tri-X Radeon™ R9 FURY 4G HBM-SAPPHIRE Technology

You should expect the higher price than Kickstarter price since you have to add up profits for resellers. Additionally, people would get mad if they have to pay premium for their early support.

Actually, The Sapphire Fury X will fit inside Dan A4. The dimensions listing on Newegg is wrong. According to the specs on Sapphire website, its length is 300mm. Dan A4 is compatible with cards up to 303mm in length as confirmed by Dan. It's never wrong to ask anything.

But I concern that is it really better than the original fan of Cryorig C7?

I would wait for Cannonlake. Not expect a speed jump in CPU performance, but the chipset improvement will be outstanding.

I emailed Cryorig regarding to the OOS status of the C7 and they responsed that they have no plan to bring it back to US market anymore. What is an alternertive option?

No sense to upgrade to Kaby Lake from Haswell. My suggestion is to wait at least until Cannon Lake 10nm. Unless you have a bunch of cash that need to burn.

These triangle holes look so mess and absolutely ruin the design so bad. I will go with Dan A4.

Will the cases be shipped in order? Like first comes first serves or it doesn't matter?

Hey Firewolfy, I am not trying to push you by any mean, just a question that if you have any estimated time to release your case for sale? I am on the process to get Dan A4 case but if your project is willing to finish soon I am gonna skip the Dan A4 since I want to support US-based projects.

Why don't just start the crownfunding on Sunday? We don't need a countdown. Holy *** I can't wait any more longer.

If you are one of die-hard fans of this case and really want it so bad, set the alarm/reminder to get to the kickstarter page at very first minutes. 1500 units are not that hard to get for people who need one. Just make a good plan and be ready on time. For people who are late to the party, well...

However, you give up to the idea of having 80mm fan on FlexATX PSU right?

dondan: Is there any warranty for this case? And also how about if the case get damaged during a transit?

That te That temp is normal and handable for mordern systems. I don't even mind if a CPU hits to 80-85C whenever the noise is acceptable. Planned to train and OC my Core I7 4790K to 4.5Ghz at low/tweaked volts.

Most of people prefer the front clean as much as possible. Looks at how attractive the successful crowndfunded NCase M1 and the upcoming Dan A4 are. Additionally, mounting a fan into such a small size case like this just increase significantly waste spaces. The good airflow design is all we need...

#1 still looks the best for me. I don't like the idea of having holes all over the case. It surely lets a lot of dusts in and bring very least cooling benefit if any. I also suggest to make a silver version, same like Dan A4. The crowdfunding will be more attractive if people have more than one...

Why do we need a handle for such a tiny case? It totally ruins the design and make it look weird. Just keep it clean as much as possible.

Sorry if this was answered before but I kept browsing the whole thread and didn't find the answer. Is Cryorig C7 the best cooler for this case in terms of performance and noise level?

dondan: Can you provide us any estimated price for one piece? I need to make sure that I will have enough money in bank. And also it doesn't hurt if we know it before the crownfunding.

2 years and a half for this case design being reality. Too long for wating. Hope all the rest of processes will be smooth.

519W Maximum load and quieter than SF600 at full load, wow! SF450 will be my PSU for my next SFF build.

I agree that the needs of front I/O panel is useless for modern SFF cases. Keep it clean as much as possible. Check the Dan A4 thread and see how people love it. One USB Type C port is more preferable for future proof. The big I/O panel like that brings us back to years of 1990s seriously.

After a lot of researches, I agree that Flex ATX PSU pretty much kills this art of work. Replaces with SFX (not -L) PSU and this case surely would be sold as a hot cake.

This is the perfect sweet point! Way over than Dan A4. Also I prefer a complete black or silver design. The two tones color makes its looking weird. And what is the best Flex ATX PSU available on a market?

So is this supposed quiter than the Silverstone SFX-L 500W? Noise is my main concern for purchasing PSUs.