Search results

  1. G

    All-In-One (ESXi/Proxmox) with virtualized Solarish based ZFS-SAN in a box)

    Thanks for the feedback on this, not sure how to set 777 in napp it on acl will take a look on this. Understand setting two sets of mirror, but do I then pair them as raid 10 by adding these together in raid 0 thus if four 1 tb drives set two mirrors in raid 0 gives total 2 tb storage with two...
  2. G

    All-In-One (ESXi/Proxmox) with virtualized Solarish based ZFS-SAN in a box)

    Call "HostStorageSystem.RetrieveDiskPartitionInfo" for object "storageSystem" Any help on this, when I created my Napp-it in one I used the perc 6/i passthrough on the DellR710, but when I use the vShpere client I get time out errors as above. I have shutdown the napp-it-13b and copy this VM to...
  3. G

    All-In-One (ESXi/Proxmox) with virtualized Solarish based ZFS-SAN in a box)

    This info maybe of use to some one, understand the old 3ware card is not the right way to go for Napp-it, but making use of old - mix hardware Set your Raid card to JBOD mode Alt-3 Access settings to the array controller and set as jbod. This will clear out any previous raid settings, BACKUP...
  4. G

    All-In-One (ESXi/Proxmox) with virtualized Solarish based ZFS-SAN in a box)

    My dell r710 has 20 gb mem for esx 5.5 from this I installed esx 5.5 on the dell r710 sata port b, then used a mod USB to sata to power the 60 ssd drive. The napp it in one was installed on this ssd drive under its data store from the remainder of disk space. If the ssd drive was 120 gb and the...
  5. G

    All-In-One (ESXi/Proxmox) with virtualized Solarish based ZFS-SAN in a box)

    I have both of the Vm - Zimbra 8.05 network upgrade + moodle vle test lab ported to napp it in one used combo method of direct copy from data store to share on NSF on the napp it and some moved over to the hp esx 5.1 vcenter . Other question, if you have a 10 gb link from your napp it in one to...
  6. G

    All-In-One (ESXi/Proxmox) with virtualized Solarish based ZFS-SAN in a box)

    I did try to copy the vmdk folder ot the storage NFS on Napp-it in One, then import with the vmx file, but this failed on boot reporting Wrong disk type on controller, Disk error 7.. had this type of problem before and involves using vmware tools in cmd line mode to convert the disk, tried...
  7. G

    All-In-One (ESXi/Proxmox) with virtualized Solarish based ZFS-SAN in a box)

    Would any one be able to provide a picture of ESXi host networking dia to show how the napp-it in one connects to the ESXi 5.x, should you set up its own VMkernel Port that uses a seperate IP subnet or VLAN Tag to seperate inbound trafic to the Management Network VMkernel Port. Used vmxnet 3...
Back
Top