Search results

im not sure, it just shutdown. How do I know if its not kernel panic?

hi Gea, I notice that my Omni VM with napp-it on it getting shutdown all the time. Do you know how to debug that?

Do you have a guide shows how to upgrade ESXi?

Hi Gea, Im running ESXi 6.5.0, and I just updated to latest omnios, but I noticed that my VMtools not running eventthough its installed. How do I make it run I enable it but it didnt seem to run: root@omnios:~# svcadm enable open-vm-tools root@omnios:~# svcs -x open-vm-tools...

_Gea since nappit already using port 80, can I run http server just to get files, upload files from outside? which folder should i use Thanks

I have a problem of accessing ZFS data via local network. The speed seems very slow eventhough I have 1G ethernet port out of my all in one system (ESXi as boot up in a seperate USB, Omni's in a SSD, and ZFS data in a HDDs). The data is not filled up all the way, and when ever I play a 4K movie...

when i run ntpdate, i got this: root@omni:~# ntpdate ntpdig: no eligible servers

hi _Gea, how do I sync the time on OMNI. Right now I have to manually enter time and zone and it keeps delaying

Hi Gea, Have you used OmniOS as torrent server? Currently I'm using transmission, but the program hangs if the download speed is too fast. Do you recommend any good program that can handle fast download speed? Thanks

I'm currently using ESXI 6.5 with Napp-it + Omni as VM, should I upgrade to ESXI 6.7? Thanks

well, I have some logitech boxes that's why I need to use logitech media server

Do you know if this still supported. I once use the link in your website to get it but since I redid my system, my media server is gone . I would so much want to redownload it but it's got deleted from the link

129.99 today

164.99 today

They wont power up with my Norco box ss-400 either

Back to 149.99, so tempting to get more

you mean this power cable? https://goo.gl/images/YhLRUA that box uses those 2 power cables

here you go

I think I have to remove the third pin from the drives themself, can't do it with the dock.

I just picked 5 and 4 of them are white EMAZ, and one is RED. Those white ones won't power up with my Norco SS-400 HDD, but they are working fine with Supermicro hot swap

it's $199 now, I should have gotten more last time

I can't even go to napp-it, very slow so i decided to reinstall OI & Napp-it and the problem persisted so I pulled all of my M1015 cards out and check one by one and apparently 1 of the card is bad. The M1015 card has been very unreliable these days, this is my second bad one in just a couple of...

My openindiana running good for few months and all of the sudden, it's very sluggish. After restarting VM, this screen shows up: Gea, do you know what's going on?

Hi Gea, Does HDD spindown in Openindiana Hipster work. I got it to work with the old OI, but i notice after I set the powermanagement in Napp-it for my HDD to turndown after certain times, but it doesn't seem to work Thanks

I don't think i disable monitoring, in fact I wouldn't know how to. How do I disable fmd and alerts? One thing is, when I unplug my 2 M1015 cards, letting only 1 card running, the disks are spinning down, but when I use all 3, none of the disks is spinning down. update 5/18: The disks are...

I did a reinstall of omnios 151014 and napp-it and everything is fine now. It's weird. Now my HDDs not spin down anymore even though I already set in power management for them to spin down after 900s

Hi GEA, I have another problem with OmniOS-VM, today I shutdown my ESXi box and restart it, and then restart OmniOS, omnios stops recognizing all of my 3 M1015 cards (flashed to LSI9211-IT ), the error for all three cards is mptsas failed, mptsas bad flash signature. Strangely that, when start...

I have to set SMB off and on again so everything is good now. I have one more question regarding to OmniOS, I notice that the time is never sync even though I installed the ntp server. Everytime OmniOS starts, I have to manually restart ntp service to get the correct time. Is there a way to make...

In this one, I can view VM but not torrent on windows. what attributes should I change so I can view both on windows? Thanks

I do have realteks but it seems not the cause since I do the same with OmniOS and Windows, the speed is as good as it should be. So it must be the problem with Openindiana. One thing though, under Openindiana, I can view all of my shares, but with OmniOS only few folders are available even...

I have some problems with copying files over the network between OpenIndiana VM and Windows 7, hopefully someone can help me debug it. When I copy big files from Windows to a folder in OpenIndiana, the speed is good, over 100MB/sec, but if i copy from OpenIndiana back to windows 7 folder, the...

I installed Logitech Media Server, so I guess it keeps checking disks all the time making them not spinning off

Does Power management work in OmniOS, I set my disks to spin down after 900s, but it seems they keep spinning all the time. Thanks

Thanks. Using Joyent pkin solved the problem

OK, i did a fresh install of OmniOS and then napp-it setup, and the problem is gone I was able to import my pools. Then I start to install transmission. The installation went fine, after reboot transmission running but the same problem again. So I guess it's the problem between napp-it and...

still the same problem after log out/log in. I'm using Current stable release (r151012, omnios-10b9c79) and nappit 0.9f4 eval

I've been using OpenIndiana with napp-it for 2 years and it's running good. today i tried OmniOS so I export my poolz from Openindiana and import to OmniOS but when I click to pool it shows error like this, do I need to do anything so I can import to OmniOS Software error: Can't load...

I've seen few topics about this problem already and I got exactly same problem too. At first I thought something 's wrong with my datastore drive and I ended up reinstall everything, but it happened again , especially when I add more HDD or simply just turn on/off passthrough devices (of course...

can I aggregate 1 physical nic passthrough and 1 vmxnet3 from esxi? or it has to be 2 physical nics

How do we do static IP in the case of aggregate lans?