Search results

No coil whine here. Are you sure it's not your GPU ? It can be hard to pinpoint the origin sometimes (bouncing off a wall etc.).

Now, M32U (with good return policy)

If you do not need wide gamut, I vote M32U as the current best compromise with 4k IPS for gaming and general use under 1k. Do buy from a place that accepts returns without questions or fees. If your budget is bigger you could also check the 38-inchers with 3840x1800 (LG & Dell). You will lose...

That's the effect that chroma subsampling has on text. You might find the following page informative : https://www.rtings.com/tv/learn/chroma-subsampling I don't know why but the "official" resolutions on my monitor forces chroma subsampling @4k for freqs higher than 98hz (so 122hz and 144hz)...

And that's why I stated that the GTX 1080ti was on the latest bios...

As I said earlier, I was able to get 4k@144hz full 8-bit RGB on a M32U and out of a GTX 1080ti. I simply created a custom resolution in the Nvidia control panel. The base is 4k144hz, with timings then set to manual and refresh rate under that adjusted to 143.86hz (I tried to get close to 6x...

The display won't let me activate the aim stabilizer under 120hz. Am I right to think that if this was indeed phosphor decay caused by the backlight itself being switched on and off then this would have no impact on the displayed image as long as the aim stabilizer option is kept off, since the...

I took 120fps videos with and without aim stabilizer sync and when it is enabled there is a visible red line/horizontal area that appears to be scanning the whole screen (ie it's moving between each frame and isn't even present on some of them). Here is a sample frame : This does not look...

I *am* susceptible to rainbow effects with DLP's and, yes, I do see artifacts on this monitor when using their implementation of BFI (aim stabilizer sync). They are compatible with your description (red ghost image on the left of white vertical lines displayed on a black background and while...

Do you have a method to show this red "phosphor decay" ? I took photographs of a white text on black background while scrolling aggressively (both vertically and horizontally) and I cannot see any evident artifact (fringing, ghosting). Scrolling white text on black background is still bad for...

Ok so I located my X-Rite and and... it's soft touch coating had turned all sticky. Anyway, after 1 hour of removing it with isopropyl alcohol I calibrated the M32U. The results: DeltaE : 0.12 (avg), 1.14 (max), 0.23 (RMS) sRGB coverage: 99.7% AdobeRGB coverage: 85.4% DCI P3 coverage: 87.8%...

I returned the M32U with the defective subpixel and got a replacement that is fine. So they do exist. Also, I managed to create a custom resolution in the nvidia control panel that somehow gives 3840x2160@144hz (manual timing: 143,856hz = 6x23.976hz) with full RGB on a DP 1.4 connection (Nvidia...

Maybe I shouldn't have used the term BFI (Black Frame Insertion). Here it's just strobing the backlight to reduce the perceived motion blur. See this section of the TFT Central review : https://tftcentral.co.uk/reviews/gigabyte-aorus-fi32u#Blur-Reduction-Aim-Stabilizer-Sync Other than that one...

So, I have a M32U on hand if you have questions about this model. Initial impressions, coming from an Acer Predator 32" 4k60hz with hardware G-Sync : - the improved refresh rate is really nice, in games but also for desktop use (scrolling text, moving windows) - on a GTX 1080 ti connected via...

TFTCentral suggest RGB values of 92,91,100 for the FI32U. I'm currently using 96,95,100 on the M32U but I still have to fully calibrate it with the spectrometer. Edit : also, make sure that BFI / Aim Stabilizer Sync is off.

Those concerned by the PWM backlighting on the Philips and unwilling to buy a less known brand might want to check the new iiyama ProLite X4071UHSU-B1. http://www.iiyama.com/gl_en/products/prolite-x4071uhsu-b1/

There is a new monitor in the 40" range : the iiyama ProLite X4071UHSU-B1 http://www.iiyama.com/gl_en/products/prolite-x4071uhsu-b1/ It looks like it uses the same VA panel as the Philips BDM4065UC, but this one has DC regulation on the backlight (ie. Flicker Free / No PWM). ETA for...

Iiyama is releasing a new screen with the same panel : the ProLite LE4041UHS. http://www.iiyama.com/gb_en/products/prolite-le4041uhs-b1/ I say "screen" and not "monitor" as this is intended as signage display. It does not come with a stand. Still, it might be interesting to know if it has the...

Have you tried fiddling with the cables to see if the blanking occurs when you move them ? It might be a bad cable or bad solder joints on the connectors.

I'm still trying to fix my GDM-FW900 and it's unstable vertical image. (shaking/pulsating/expanding-contracting, see my original post) So far, I have been focusing on checking the boards for bad connections and testing for bad electrolytic capacitors (low value and/or high ESR). I already...

Hello, I finally was able to get myself one one those beasts. Unfortunately, my sample is not in a mint condition. :/ Light cosmetic damage put aside, it's main problem is the stability of the image. As some of the posts in this thread were quite well technically informed, I would like to...