New Build Parts:
Define R5 with 2x intake, 1x outtake
Intel i7-4790k, stock clocks
Gigabyte GA-Z97X Gaming 7
Noctua NH-U14s
At idle the core temps are in the mid-20Cs but as soon as any load is applied they jump up.
E.g.
Running windows update: upper 30s to low 40s
Gaming: low to mid 60s...
Windows has been crashing a bit lately so I decided to run memtest last night. After about 10.5 hrs I had over 1000 errors in a 100mb section of the 2nd stick. This afternoon I pulled* the stick and kablamo the whole system is hosed.
System:
i7-4770k
Asrock z87e-itx
Crucial Ballistix VLP...
The CPU, mobo, and video card were working when pulled this afternoon but no warranty included. You have 7 days to test for DOA. No parts have been overclocked to the best of my knowledge. All prices INCLUDE shipping costs. PayPal only please(CC ok). I normally ship via USPS w/ Delivery...
Heatware: http://www.heatware.com/eval.php?id=3992
I have a brand new, unopened 64GB OCZ Agility 4 SSD for sale. Came with a Zbox I bought on Newegg last week but I already have a larger SSD for it.
Looking for $55 Shipped via USPS anywhere in the lower 48.
Payment Options: Paypal...
http://www.engadget.com/2012/10/14/fcc-to-allow-encryption-of-basic-cable-with-a-few-strings-that/
May or may not affect you but I thought I'd post it anyway
My friend hadn’t used his old gaming rig for months and was basically going to let it sit in a closet until the end of time. I convinced him to let me strip it down and try to sell it. I am in possession of all parts listed and accept responsibility for any issues that crop up. All...
Nothin' more to see here, thanks for shoppin'.
Paypal Only
Heatware - http://www.heatware.com/eval.php?id=3992
All parts have been tested working unless noted otherwise but sold AS-IS(if DOA let me know). Buy items marked "No returns or refund" at your own risk.
If you have an issue...
http://www.newegg.com/Product/Product.aspx?Item=N82E16820249019
I looked around and it seems to be $109+ else where.
5-Year warranty, Marvell 88SS9174-BKK2 controller, and 24nm synchronous MLC NAND flash modules with Toggle mode support
Only 2 reviews, a 1 egg and a 5 egg. Couldn't...
My little brother is getting new parts for Christmas and I wanted to make sure the PSU can handle it before we slap it all together.
Corsair 520HX, about 2yrs old, powering the following:
AMD x4 960T w/ Thermaltake Frio
Gigabyte 970a motherboard
2x2GB DDR3-1600 1.5v
1TB WD Black HDD...
EDIT UPDATE 12-16-11: The card has found a new home with a new owner and is no longer up for grabs.
I picked up a refurb STX a couple of months ago when I was planning to do a retro stereo setup with my computer. I've decided to go in a different direction since then thus I've no use...
My brother is looking to upgrade his gaming system and wants to spend around $300. He'd really like to be able to play BF3 and ME3 but is ok with not having all the eye candy turned on.
Currently has:
C2D E7500
s775 mobo
4GB DDR3-1600
1gb 4850
Corsair HX520 psu
1680x1050 LCD
1) What will you...
For my current PC setup I'm running Infinity Entra One bookshelf speakers, TSC ASW-8 sub, and Panansonic SA-XR10 receiver. Onbaord audio powered by this chipset. Used for roughly 70/30, Music/Games&Movies
The "I want something different" bug is starting to bite and I'm looking for some...
So....I got my new system all slapped together and I'm pluggin in the cables and suddenly I realize the mobo I got doesn't have an optical out for the onboard audio. :o I'm trying to connect it to my receiver and right now I'm stuck using a 3.5mm to RCA stereo cable. Would a spdif bracket be...
On a whim I went and bought most of a new computer this weekend. Made my first trip to a microcenter and got an x2 555be and a MSI 785gm-p45 board. Anyhoo my old system is a 939 using the original Thermalright SI-128. If I'm just attempting to unlock the cores at this point is it worth pulling...
Well I've been putting off upgrading for a while but its gotten to the point where the only people I know with a slower system are my parents. :(
Current Rig(built roughly Nov '06):
Opteron 165 @ 2.5ghz w/ Thermalright SI-128 (non-SE)
2gb Mushkin ddr1 pc4000
budget EOL MSI 939 board
250gb...
:cool:
Over the past 7 years I have built many computers for friends and family. During that time my youngest brother has only had 1 new computer and a few hand-me-downs to upgrade it. Lately he's been bummed out because his current rig isn't cutting it. For example to even run the Company...
I decided to try overclocking my Opteron 165 today and so far it has been great but I'm not to sure about the temps.
Opty 165 CCBBE 0616
Using the retail box AMD heatsink I am now running at 2.5ghz at stock voltage.
After 8hrs of Prime95ing both cores Coretemp 0.95 reports that Core...
This is my second Enhance PS-E5150GH from Ewiz. The first was ok for ~1 week but none of the voltages were stable under load. Then when I tried it on my new DFI Ultra-D the fans would spin up for a second and then shut off so I tried it in the other motherboad I had which it was running on and...
Which one is better, the 2 heat pipe or the 4 heat pipe version. Now I know the 4 is newer but I have heard the 2 is better. Can someone straighten this out for me? Also is the 2 piper better or worse than a Freezer 64?
Thanks
Supposedly it has ~36a total on the +12 rail
e6300
stock CPU cooler
GigaByte DS3
2x 1gb PC2-5300
2x 250gb HDDs(1 sata, 1 ide)
2x 120mm case fans
8800gts
Stock? Yes/No
CPU OCed? Yes/No
***Update***
Ok, PC boots with:
SATA HD
IDE HD
PCI-E Vid Card
MOBO
DVD-RW
2x sticks of ram
CPU-Fan
PC Does NOT Boot with any combination of the above if:
A fan is connect to the case and to the PSU
A fan is not connected to the case but is connected to the PSU
A fan is connect to...
Well I've got my new system up but while testing limits I ran into a slight problem.
FX-55 set to x7 multi
HTT x3
1:1 I can't boot at anything higher than 240mhz(FSB). If I try to boot above that then I don't even get a post screen. The keyboard doesn't flash and the monitor pwr button...
Current system:
Enhance ENP-5150GH 500W Rev.2.2
FX-55(san diego) @ stock for now
Artic Freezer 64 w/ fan pluged into the CPU1 mobo header
MSI K8N Neo4 FI w/ latest bios
2x 1gb mushkin redline pc4000
1x 250gb sata HD
1x NEC 3500a dvd-burner
1x 7900GTO @ stock
AMD Cool n Quiet disabled...
How accurate is ATitool with this card?
I'm using v0.25beta16
It took the core up to 698 before it detected an error so I backed down to 690 and ran it for a while and didn't see anything and didn't detect an error.
The memory on the other hand was a different story. It took it up to...
Can someone explain to me how overclocking these works? The last thing I overclocked was my current XP2500+ to 2.2ghz. :(
What have/have on the way:
Retail Opty 165
Artic Freezer 64 w/ AS5
OEM MSI Neo4 FI(250 HTT known to be possilbe)
2gb Mushkin Redline pc4000
This whole HTT stuff...
I bought an FX-55(San Diego core) from Newegg a few weeks ago when they were on sale. I haven't tested it but I've laready decided that I don't want it. :D
Oem FX-55 Sandiego $150 shipped via carrier of your choice(USPS, UPS, FedEX)
Prefered Payment method is Paypal(non-cc/cc)
Bonus...
Given every thing else is the same which would preform better for gaming:
XP Media Center
7900GTO
250gb HD
FX-55
MSI Neo4 FI
2gb DDR 500 (low timings)
or
e6300
Gigabyte DS3
2gb DDR2 800 (high timings)
at stock speeds?
over clocked?
You know you go into manual mode and hit the Detect Optimal clocks button and it test, how well does it work?
I've tried it several times and its given me everything between stock and 419/830 on a BFG 6800OC. I would try it at 419/830 but it sounds a lil high and I don't want to fry my card.
Whether stock clocked or overclocked, my system has started freezing at random times for 30 secs or so and then goes on like nothing ever happened. It happens during games, chatting on AIM, or even surfing the web. May happen once every two days, once a day, 5 times in 20 mins. It has been...
Well so far I like, big jump from my 8500. Anyway, did the pipeline/vertex trick and it seemed to work fine. I looped 3Dmark03 three times and didn't see a single artifact and my '03 score went up ~1400pts and my '05 score went up ~500pts. Anyway, under load according to Rivatuner I'm getting...
I don't really know and I'm trying to explain it to a person with the technical know how of a 5th grader and its not going too well. Can anyone explain it in layman's terms? :confused:
Looking for 1GB (2x512MB) Buffalo PC3200 w/ CH-5 chips or comparative (Corsair Value/Kingston Value ram).
Looking for default CAS2.5 or lower.
Preferably from the same person and with the original packages.
If you've tested it at higher than rated speeds even better.
PM me
Thank...
Just OCed my 2500+ to 3200+ and I tried to run Prime95. This is what I get: http://pics.apartment808.com/users/SithSolo1/Primefail.gif
Antec True380 psu
Shuttle AN35N-Ultra
2500+ week 43, locked, FSB at 200mhz stock voltage
2x256MB Mushkin Black Level 2 PC3500 running 200mhz @ 2-2-2-11...
:(
Ok. Just finished putting my system together and I booted but I got no video signal...
Antec P160
Antec True380
brand new barton 2500+
(2) 256MB sticks of Mushkin Black Level 2 PC3500
Radeon 8500
Shuttle AN35N-Ultra
250GB HD
reset the bios and rebooted with both sticks of...
SOB!:mad: Well just opened all my goodies and I've come to find that the 947-U won't fit on my mobo. Doh!
I want to trade this straight up for a SLK 900A w/ all the parts or you can by it for $35+ actual shipping.
I just opened the box, this has not been used. If you want pics lemme know...