hello hello,
Just put this machine together
5930K
Rampage V
Is real temp and CPUZ compatable with haswell E ?
And where can I find them? (I keep getting directed to the wrong sites I think)
hello hello,
Well I just put it in, downloaded the latest drivers from Nvidia and all seems ok.
I do have precision X but havent used it yet. Seems somewhat self explanitory in some areas and not in others.
I dont think I need to overclock the GPU (dont know really)
So the big question...
Hello hello,
Machine specs below,
Will my current power supply and set up run a single SC GTX 780 with ACX cooler ?
This is my PSU
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139007
I would like to pick one up when they become available.
I am going to have to re seat my cooler when I add 2 sticks of memory to my machine.
Someone recommended this
http://www.frozencpu.com/products/10740/thr-77/Coollaboratory_Liquid_Ultra_100_Metal_Thermal_Interface_Material.html
I have IC Diamond on there now which I dont have any...
Hello hello,
I just picked up another 8Gb of ram. Same exact as whats in here now.
When I first built this machine I overclocked it and set the ram timings (CL9-9-9-24) and voltage 1.5v
I'm hoping seeing as this the same exact ram, timings, voltage and all matching product numbers and it...
Hello Hello,
I have a machine (AMD) that is a duel boot configuration XP (was on first) and 7.
This machine has 2 HD's where both OS reside on. They are a Raid0 config.
It also has another HD for backup purposes (which I have done)
I think I would now like to wipe both OS clean and just...
hello, Hello
Just put together a i5 2500 , Z68 V Gen 3
OK, shes up and running, windows installed
In device manager I got 2 question marks
1- PCI simple communications device
2- SM Bus controller
I only have 1 CD/DVD rom in there and 1 HD in there (using onboard video and...
hello,
I am building a medium end machine. Its going to be used for browsing, email and some homework.
Asus P8Z68-V/gen3
I5-2500
And want to use the on-board graphics.
Is there anything I need to set up for that? (bios or drivers or anything?)
Also on the back of the board there are...
I am putting together a new machine.
I just installed the cpu cooler, Cooler Master Hyper 212 Evo
I am pretty sure I installed correctly.
After the installation I can wiggle the heatsink slightly even after full tightening.
is this normal?
Hello,
I have parts comming for a machine I am building for my son. (its for lightweight use)
I went to this power supply
»www.newegg.com/Product/Product.a···17371016
and this MB
»www.newegg.com/Product/Product.a···13131792
CASE
»www.newegg.com/Product/Product.a···11119196...
hello hello,
I presently have a P8P67 Evo rev3 board.
I am having problems with it (BSOD and so-on)
I am thinking of rebuilding this machine. (2600K)
I was thinking of using this Mobo
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131791
this cooler...
Hi,
I am planning on doing another machine. water cooled.
I have never water cooled before (i have put machines together though)
it would be a 2600K
I would like to use this...
hello hello,
Been a while since I have been here at this great site. (been busy)
MB is P8P67 Evo B3
2600K
overclocked to 4500 +060 Offset
load Line cal is set to regular
Having a problem every so often
When basically doing nothing (surfing maybee) I get a BSOD error 124
rarely...
Hello,
I presently have a P8P67 Evo Rev3 I7 2600K
Seems to be working ok, its overclocked to 4.5 @ offset +0.60
Would I gain anything changing to a Z68 Board?
I usually live by "if it aint broke"
I am just wondering if I'm missing anything
I might be interested in one of these.
http://store.antec.com/Product/cooling-cpu_cooler/kuhler-h2o-920/0-761345-77086-6.aspx
http://store.antec.com/Product/cooling-cpu_cooler/kuhler-h2o-620/0-761345-77085-9.aspx
I dont know which one is a better unit.
$$ is not a factor
I am currently...
Hello,
I just Oc to 4.5GHz
Offset + 0.050
LLC regular
Ran prime for an hour and 1/2 . All was good, temps maxed out at 65c
All of a sudden BAM!
BSOD error 124
Not sure where to go from here.
Any suggestions?
Hello hello,
I have swapped boards and disabled marvel controller.
What is the JMB controller and can it be disabled.
I have 2 seperate HD's in the Intel 6Gb ports(1 ssd for OS and 1 data drive) and 2 CD / BD in the 3Gb ports.
I do not have a raid or SLI set up.
Hello Hello,
I know I asked this question before but kinda lost track of the thread.
I am swapin out the MB right now.
I only have 2 choices for paste. (cause thats what I got on hand)
IC Diamond
or
NT-H1 (paste that came with the Noctua Cooler)
Presently I have the NT-H1 on it and...
Hello, Hello,
I just wanted to ask as I am about to physically switch the board out.
Has anyone switched their boards yet?
If so did you have to do anything such as Bios, drivers, windows?
Any problems?
I would just like to be prepared.
OMG,
came home for a quick stop in from work and ITS HERE!!
A brand new Asus P8P67 Evo marked B3 Revision,
An apology letter of sorts and a bonus.
A new HS-101 Notebook Headset for ("remaining a valued Asus customer and for being patient")
Welp, I gotta go back to work, looks like I...
Hello Hello,
I am expecting my new P8P67 Evo B3 next week.
(not sure what bios version MB's are shipping with)
I have read somewhere there is a certain procedure to be followed if flashing the new 1305 bios.
Can anyone direct me to that thread explaining the correct way to do that?
For...
hello hello,
AsusP8P67 Evo
I just thought I would ask what drivers will be needed / downloaded when I switch out the board.
This might help alot of people.
A general list with drivers and links would be great.
Also Bios recommendations (version) for best results
Just wanted to ask which is the best Thermalpaste to use.
I used the paste that comes with the Noctua CPU cooler last time.
Now that I have to switch the MoBo soon (i hope) I just thought if there is something better I should be using.
Hello Hello,
In light of the replacement boards becomming availabe soon (hopefully) I just wanted to ask a question.
Is it as simple as remove everything on the old board, reinstall everything on new board (remove old and apply new Thermopaste)
Start er up, check er out, apply new...
I noticed this listed on the egg.
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131695R
Its marked as "open box"
Not sure what that means, but I AM waiting for a MB replacment from them for this very product.
Hopefully soon
Welp that is the question.
I figured Ide ask the pros on this one.
My specs are in the sig.
and I HAVE the money right now, so NOW's the time if I am goin to do it.
I mean, I game pretty often, (crysis and games like that)
I just dont know if its worth it or not.
I would install the...
Hello, hello
I have had had 2 BSOD since I built this machine.
I THINK it happened as soon as I exited the AI Suite. (icon in notification area/exit)
Ai Suite loads at windows start up. I never use it. I am kinda afraid to uninstall it but would like to. Would it mess anything up if I...
hello hello,
I have a P8P67 Evo
1204 bios
I have the AI Suite installed but sometimes It causes my boot up to slow down or it dosent seem to load completely and locks my system up (rarely but it does happen)
Can I uninstall the AI Suite completely without any issues?
I never use it anyway
hello Hello,
When I open the nvidia control panel the only option I have is the 3D options.
I have no other options there, so I can not set up my card.
Evga GTX 580
Driver 6658
Windows 7 64 Bit
Hello Hello,
<--- new member here and glad to be a part of this site now.
I have a WD VelociRaptor
WD6000BLHX 600Gb 10000 RPM 2.5 Sata 6.0 Gb
Drive, Its partitioned and I use one partition for programs and games, and the other partition I use for back ups.
I also have a Crucial C300...