[SOLD] - RTX A4000 16gb - Custom modded, white ITX

Status
Not open for further replies.

xenium

2[H]4U
Joined
Aug 15, 2006
Messages
2,088
Giving this one last shot here before it goes on ebay. TIred of it tempting me to build another ITX rig I don't need.

Selling my one of a kind, custom RTX A4000 16gb. This is basically an ITX 3070/3070ti but much more efficient, with 16gb of vram, and all the other pro/quadro card goodies.

Spec list:
  • Palit 3060 heatsink
  • Custom white shroud + white 92mm fan (2.25 slot width)
  • 6 pin pcie pigtail replaced with 8 pin soldered directly to the pcb
  • Power limit increased to ~180w

Stock, these are limited to 140w due to the small single slot HSF. You can safely increase the power limit with a better heatsink, pushing these into 3070/3070ti performance levels.

If you want/need a 2 slot card, a stock Palit HSF can be had for ~40 bucks, and brings it down to 2 slots. If you want this setup, pay for the heatsink and I will install it before shipping.


Sold


Heat: https://www.heatware.com/u/46217/to

1.jpg
2.jpg


3.jpg
4.jpg


5.jpg
6.jpg
 
Last edited:
Is that cool-looking ballpoint pen included, or if not, will you knock off about $100 ?

j/k....GLWS :D
It's actually one of the 500 piece (or whatever marketing crap they say) screwdriver/electronic repair kit with a bunch of various small bits. Super handy, and a killer deal when they're only like 20-30 bucks.

But to answer your question... No. If anything it adds $100 because I use the thing almost daily :)
 
It's actually one of the 500 piece (or whatever marketing crap they say) screwdriver/electronic repair kit with a bunch of various small bits. Super handy, and a killer deal when they're only like 20-30 bucks.

But to answer your question... No. If anything it adds $100 because I use the thing almost daily :)
Yea I thought about that too, cause upon a 2nd look, it seemed alot like the kit I use on my electronics :D....
 
Status
Not open for further replies.
Back
Top