Recent content by Steve0Kinev0

Ahh okay. I thought that was just the initial shipment and that the issue was already rectified. Looks like I'll be ordering a second one in February! Haha.

To be clear... Do you mean that there is supposed to be an updated cooler that will be coming in February or that they are simply going to be restocked? The one I ordered from Overclockers UK January 7th performs similar to my LP53 w/ noctua A12x15 fan. However I configured the fan to blow...

It looks like /u/volopasse called overclockers UK ~7 days ago and they said the issue has been rectified. I can't find any other sources that mention this other than the few people contacting them directly. If anyone else has more info I'd love to know before ordering one for my Sentry...

I am wondering this as well. Looks like I'm going to be doing some testing.

SaperPL and ZombiPL. I have some design questions regarding thermals. I have a blower (founder edition) 1080Ti. I know cooling it isn't perfect in Sentry. However, would it be beneficial to seal off the GPU chamber from the CPU and PSU? (I have a 7700k CPU). Logic says yes, but I would like...

The mock ducting I did following your method Ej24 helped CPU temps ~5 degrees C and 1080Ti gpu boost clock ~100MHz (from around 1500MHz to around 1600MHz).

Correct, the 7700k is delided. However, this gaming test was during the Crysis 3 grass level torture test, this stresses the CPU a lot. Gaming in something like Overwatch or Doom holds the CPU temps at around 65-70C. The 120mm fan is actually off center where the bottom of the fan meets up with...

See attached screenshot during Crysis 3 "Welcome to the Jungle" grass level stress for ~8 minutes. I'm curious by what St1X said... I'm going to try to reverse the CPU fan to use as exhaust, and test again... Right now it's sucking fresh air in from the outside and blowing it down onto the CPU...

I said "Friend of mine has yet to pick up his half". That wasn't very clear, that meant I have a friend who is picking up the OTHER case. ;)

We made it w00t! The sentry is finally here and looking interesting I must say. Shipping box was in good condition, no broken parts. Friend of mine has yet to pick up his half (the other sentry case). Enjoy the photos of my build. Thanks again Dr. Zaber team, this case is amazing and you all...

mining or even gaming. It will clock higher than 1582MHz due to GPU boost 3.0. Keep in mind this was in an open air case with no fans. I will update temps/clocks with new sentry build (Just received the case today!) UPDATE: the boost clock in sentry isn't nearly as good. It's usually around...

My 1080Ti FE temps are fine. Sits at 84C and just adjusts the boost clock. Mine hovers around 1700mhz boost. I'm not sure if repasting will give any noticeable benefits... But now I'm curious.

I'm also 1st batch of white sentry. Located in Minnesota, US. This was extremely helpful.

I have a 1080Ti FE but no sentry yet white + black order #139 or something. (Minnesota, USA). And in my old micro ATX case the GPU stays pegged at 84C with the boost clock fluctuating between ~1650mhz-1850mhz. The performance is a noticeable jump from a 1080 even if it's a low clocked blower...

Speak for yourself :-P