Wanted to share my new V2 build here. The specs aren't eye popping or anything but I did make the cables myself and am pretty proud of them!
Here's an album link: https://imgur.com/a/K1FR2Dc
I got the wire wraps from ensourced.
https://www.ensourced.net/wire-wraps/
They are meant to be installed when building the cable but you can cut a hole in them to feed the wires through. There are pictures of this on the product page.
Haha, thanks! Don't know if you have a Corsair PSU and are serious, but I already have a black/white/gray 8 pin GPU cable done and could finish out the set if you like the colors.
https://i.imgur.com/i9uyqhM.jpg
The fan is great, I also have an NF A15 and it performs just as well as the Noctua...
Speaking of the Asus Z370i, is anyone having the red CPU LED error light come on when cold booting? This is a problem on my Z270i and many others have noted the issue as well.
Those with custom loops in the M1: what are your temps like? I'm wondering if temps are good enough to just run one 240mm radiator with slim fans at the bottom or if adding a 92mm rad in the back would have a noticeable improvement. Thanks!
Those lengths should probably be good if your 8 pin cpu connector is in the same place as mine! I have a good bit of extra length on my cables. I would measure with a string and tape measure first just to be sure though.
And wanted to update everyone. I overclocked my 7700k to 4.9GHz. Didn't...
Thanks! Not the best, I just exported a 4k video and it hit 80 degrees under load. I'm going to delid and do a light overclock. The bottom fans are the only intakes so it's pretty choked for air.
Thanks! I saw your picture, I like what you did. Didn't think of that. Yes, the rear m.2 slot got...
I have a EVGA GeForce GTX 1070 SC GAMING ACX 3.0. Same model but less black and with a backplate. On the default fan curve, my temps peaked at 76 degrees in Unigine Heaven. That's without 120mm fans at the bottom of the case.
I'm planning on doing a tempered glass side panel mod and therefore the bottom two fans will be the only intake in the case. I'm guessing a fan with a higher static pressure would be optimal for this due to the video card being right there? What kinds of fans are people using at the bottom?
I...
Hi guys, basic question. This dust filter should still work on V5 of the M1 correct? Have there been any changes to the bottom since V2 that would prevent this from working?
https://www.amazon.com/DEMCiflex-Filter-NCASE-Bottom-Black/dp/B01IABY2D6