Recent content by Micand

Thank you once again for your suggestions. I have thrown myself on the mercy of the Internets as a last resort, and though I've yet to achieve satisfaction, it is the burning hope that you guys give me that keeps me going. I tried, and alas, no improvement. I *know* (to the extent that...

Thanks for your suggestion. With the RAM timings you suggested, command per clock disabled, the 133 (that is, 2/3) RAM divider, a HTT of 270 and a CPU multiplier of 9 for 2430 MHz, at either stock vcore (1.35 v) or 1.375 v, the In-Place Large FFTs test of Prime95 still errors out within two...

Thanks for your response. I don't believe the timings are the same -- my friend hadn't used the board in some months, so by the time I received it, the BIOS settings had reset. Still, the RAM is only running at half the frequency of the HTT, and so never exceeds 145 MHz; timings are all set in...

Howdy! I recently purchased a used AMD Opteron 165 processor, DFI LanParty UT NF4 Ultra-D motherboard, and two 1 GB sticks of Geil PC4000 RAM from a friend. He had been running the CPU at 2.6 GHz with a 1.4 v vcore (stock vcore being 1.35 v) ever since buying the hardware new a year-and-a-half...

Hello, I'm having serious problems with my 19" CRT, a Sony CPD-G400, running off a Radeon 9700 Pro. It was working well until today, seemingly because of damage caused to the EDID of the monitor by the ATI Linux drivers. Upon rebooting into Windows from Linux today, the monitor was detected...