Recent content by imsuchageek

Did you ever figure anything out with this? Having the same issue with the same card.

IPTables would make this very easy. Typically, echo replies to pings can be blocked by blocking port 7, which is why I tried to go that route. There are routers in between the subnets, but due to security policies in place, and for other reason, this has to be applied to each host in some way...

Thanks. I ended up stumbling across that and I have everything downloaded, but the drive isn't showing up at all on the latest motherboard i've connected it to. I'm not sure I'll be able to flash the firmware if I'm able to get it detected as jibberish again on another motherboard either. The...

We have spent days on this and have gotten no where. Here's the deal. I need to disable ICMP, at a minimum ping/echo, responses from the management IP to all non-local subnets. So in other words, lets say a random ESXi server's IP is 10.10.10.101/24. I need all hosts on 10.10.10.x/24 to...

Anyone have ideas? I'm still stuck on this....

I don't = \ I wish I could afford a service contract. They make it impossible for individuals to get the resources they need to learn this stuff. If that is what's needed, hopefully I'll come accross someone who will login to the EMC site and get me the image. The FLARE image and utility...

It's probably been close to 30 minutes now. How long is the typical bootup on a fresh FLARE image flash? Do you know? Thanks for the help

Solid green on top and flashing amber below that. Very fast flash.

One more thing, the Amber LED is flashing very quickly. I'm going to let the unit sit/run for a while and see what happens. The activity lights for drives 0 and 2 are flickering, and those are the FLARE drives for SPA, which is connected to the first DAE, so maybe its still doing something...

I've read quite a few forum posts and it appears that the unit *might* be actually booting up and thats just the last log entry. If thats the case, it is my understanding to point the browser to the IP of SPA to load navisphere. But, I'm not sure what the IP address is. Since I have reloaded...

I recently procured an EMC CX3-10 from the secondary market. I'm trying to learn the basics of EMC equipment. I know its old, but even with its age it cost me a pretty penny to get everything. I don't have the money to drop on a service contract with EMC for my home lab, so I'm pretty much on...

I'm going to create a new post for this topic since its a bit off from the original post.

Well, I managed to get everything hooked up but I've been running into some problems and I was hopeful that one of you could help. Basically, the boot process is getting stuck at: int13 - GET DRIVE PARAMETERS (Extended) (1608). I booted into the utility partition and reinstalled FLARE from...

I feel dumb now! Thanks for the info. I'm about to get started.

I recently grabbed an EMC Clariion CX3-10c from the secondary market so I can learn a bit about emc and play around in my home lab. I'm having a heck of a time trying to find/download the software needed to do anything, such as Navisphere. Obviously, I do not have money to drop on a support...