Recent content by ilkhan

Sending PM

I think I have a 0.6mm sitting around, but Im still printing with the 0.4 it came with.

Why not grab one of the gridfinity based containers?

Haven't heard anything about a larger model. Id be first in line if they did.

Not discouraged. I shrunk the turtles I was printing a little and removed a color, they are already done and printed fine.

Ended up getting some layer shift and had to cancel the print. 😭

I print directly from my computer, so never tried a card.

10 hours in on a 45 hour print. Multi-color is great but its so bloody wasteful and slooowwwwww. Printing at 0.1mm layers instead of 0.2mm doubles the color switches. :(

Iso doesn't actually remove oils. Wash it in your sink with soap and a little scrubbing. Then try again. This is a textured PEI sheet, right? Default filament profile with bambu slicer or orca?

If you are getting failed prints its not because of the speed. Did you prep the build plate? How exactly are they failing?

I've never put anything on my build plate. Light scraping with dish soap and a scrubby once a month or so and that is plenty of adhesion. Ill probably wait for the generation after meteor lake anyway. Dont need the gaming performance, but not real happy with how the new XPS16 is looking.

Link? Im interested in the framework 16 too.

Make sure are on the newest firmware. Bambu changed some stuff recently that drastically cut down on the noise.

P1S is enclosed. The P1P is open but easy to enclose.

If you can get a P1S instead do that. Nothing wrong with the A1, but bed slinger printers have their own issues which enclosed CoreXY format solve nicely.