Recent content by commander_

  1. C

    Raijintek Metis ITX [Build Log]

    I was having the same problem when I was still in my NCASE M1. The computer would just shut off, and then reboot out of the blue. Surprisingly, I had this problem with my 450W SFX PSU (gold rated from Silverstone) and my current 600W one (same as the one you had). The problem went away...
  2. C

    Raijintek Metis ITX [Build Log]

    Sorry for the late response, but here's pictures of what I did with the DisplayPort hub. I used a Belkin splitter that also act as a hub for $32. https://imgur.com/a/EPrky My specs: i5-4670k ASUS Z87i-Deluxe Crucial Ballistix Tactical LP 16GB (2x8GB) Sapphire R9 Nano WD Blue...
  3. C

    Raijintek Metis ITX [Build Log]

    I'd prefer not to. I'm just going to buy a DisplayPort hub to run off of my single port.
  4. C

    Raijintek Metis ITX [Build Log]

    Just built in a Metis and I cannot connect my second monitor because of a little tab on the expansion slot bracket. Anyone has any suggestions on what to do now? I think this was mentioned earlier in the thread.
  5. C

    SFF Case for mini-ITX GPU/MB

    Back and I tried the washer method, and you're right, not enough clearance... it was so close though. The file method will indeed work because the card WILL fit in the Osmi no problems. Haven't tested it though, but that little end on that picture I took that Gtek l linked is the only thing...
  6. C

    SFF Case for mini-ITX GPU/MB

    PM'ed you!
  7. C

    SFF Case for mini-ITX GPU/MB

    I did, but I'll try again to see if I can't manage to fit it in. I'm really bummed at the moment, stayed up until 1am trying to build before I gave up.
  8. C

    SFF Case for mini-ITX GPU/MB

    Tried building in my Osmi, and I cannot finish it. First, I couldn't install my own 140mm fan since long screws (ones that allow you to pass both holes on the fan) were not provided, so I decided to keep the stock fan. Then, the extra VRMs on my Z87i-Deluxe on the top of the board (as well as...
  9. C

    SFF Case for mini-ITX GPU/MB

    My case arrived, but how do I change the 140mm fan? Can't figure it out... thanks in advance!
  10. C

    SFF Case for mini-ITX GPU/MB

    I saw that one already... :p I need more! I just purchased a $20 Elite 130 to be my placeholder case for my parts as I sell my M1... Hopefully Gtek ships the next batch soon...
  11. C

    SFF Case for mini-ITX GPU/MB

    So, anyone else finish a build in their Osmi? Just wanna look through to see if I can plan out my build process in it!
  12. C

    Before asking NCASE about Micro-ATX...

    I would switch to mATX for this case, wow dude. Stunning.
  13. C

    SFF Case for mini-ITX GPU/MB

    Yep, now it works for me! Great build log! I was also planning on flipping my PSU to let it get more air from the 140mm fan on top.
  14. C

    SFF Case for mini-ITX GPU/MB

    Nice! :D Now, I'm hoping I'd be in wave two... I already have a buyer for my M1 hehe. Just waiting on the Osmi, and thanks for that note on the hex screwdriver, gotta find mine.
  15. C

    SFF Case for mini-ITX GPU/MB

    Exciting news indeed! In other news, my custom blue and white PCIe cable came in as well as my slimline SATA to SATA adapter. Just need the case now! :D
See more
Back
Top