Recent content by ashaw

I don't buy that. The 600W thing is bogus. The PcI std does not allow more than 350W to be used by a PCIe card. The rest of the system should not be using more than 100W. Especially since tat psu stays in specs upto about 500W (though not recomended). Further a pump that fails due to having...

There is a third profile on these, an EPP. That profile is 1600mhz at 1.35V

That does seem to be the case, If one really tried you could probably jerry rig one from high density industrial PSUs however a quick estimate on the cost suggests a price on the order of $1000 for such a psu.(I was thinking for myself of watercooling a tdk-lambda pfe1000F-12, and adding a...

Can we please have shorter cables, the current ones are just ridiculous.

That is a single core cable that I will need to strip terminate and connect. I was asking about the wire. This is 1.8 mm diameter PVF2 insulated cable. If I use this I should be able to get the cable bundle under 8mm diameter sleeved.

I am going to do my own power cables. I was wondering what you guys think of this stuff http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=55A0811&DocType=Customer+Drawing&DocLang=English.

With was wondering waha360 if you had any info on my previous request for information regarding cables?

Also, what is that connector for the button ribbon cable? I have seen it before buy I cannot remember off the top of my head. The power connector does not seem to be as big of a problem, you are using a standard c14 socket, just solder the wire and pot the thing with sugru.

Is there any way to get additional usb 3.0 and audio FP cables, I want to shorten mine, but do not want to have to risk bring left without connectors.

Mine just came this morning, 7:30 groan. Mostly very happy with it. There is a scratch on the top panel that while very minor will probably drive me insane but that is just my OCD. All in all thanks very much guys for all your hard work, now it is on me to use this guy like it was intended.

Can I ask Why? all these jacks do is connect straight to a header, if you want a passthrough so bad, just crimp a mating cable with a male headphone connector on one end and header pins on huge other, and save the resale value. If I remember correctly the USB header ground is isolated from audio...

No as the h61 chipset does not support overclocking however, you will find that the 3770k is much faster than your cpu anyway.

I'm thinking of building a system with a gtx790 when it comes out, and was wondering, do you think I should use a low restriction rad like the black ice or a higher restriction one like the koolance. I am thinking the koolance may be overkill, but was wanting a second opinion.

Well, I'm in australia and have one ordered.

What is the distance from the case bottom to the top card slot, i am thinking of adding a second 240 radiator to the bottom, a 240mm black ice pro and a pair of 12mm scythe fans, one in push one in pull. Wondering if this could work.