Search results

I guess what has me confused is that I don't have my gpu fans connected to the cpu they are connected to the aio header on the motherboard. Therefore I don't know how to best set a profile for it.

Any advice on the best applications for setting franchise profiles etc and monitoring temps etc? I have my cpu fans on the cpu header and the gpu on the aio header on the strix 570-i

Hahahahaha In the ghetto where things are super quiet and its cold as ice.

Yes but that would require taking a dremel to the heatsink which I prefer not to do. This was I can still sell the card on when the 3080ti or similar is released.

IT WAS THE BIOS!!!! All working fine now. Now I get to start tweaking. I also removed the fans on the gou but left the shroud as the shroud buts nicely against the Nocturn and functions like a duct. This also saves me from using the dremel. Thermals shortly.

Unfortunately its full lockdown here in London

Thank you for all the help. I am going intake on cpu and gpu. Trying to source a cpu to update the bios now. I hope that's the issue at not a hardware fault.

What is cheapest cou I can buy to do this please?

I have confirmed the Power supply is sufficient. Thanks for all the help

Thank you bud. Why would this set off the RAM warning light and not the CPU light?

My Power supply is brand new Corsair Platinum 600 (750 was out of stock)

https://pcpartpicker.com/list/WGR3wz This is my actual list of components and yes there are some warnings:

Thanks for the help. How would I know if it was showing out? The motherboard didn't come with any screws. Is there an example of what the screws should look like? Found this stamp (last 4 digits are 2407) Thank you for the help! Much appreciated

Strix X570-i motherboard The light for DRAM is on and I have tried everything... one ram stick in each slot, refitting gpu, reconnecting all psu cables. Thanks for the help! If I do need to do a BIOS flash I have no.odea how to.do.it when I can't see the bios screen.

Ok booted her up for the first time and no video signal. All fans working, LEDs on motherboard and gpu working. No beeps and stays on. My keyboard also isn't lighting up. 1) If I have a Ryzen 5950x in a x570-i motherboard do I need a newer bios installed for it to show a video signal or boot to...

Ok booted her up for the first time and no video signal. All fans working, Rob on motherboard and gpu working. No beeps and stays on. My keyboard also isn't lighting up. 1) If I have a Ryzen 5950x in a x570-i motherboard do I need a newer bios installed for it to show a video signal? 2) Any...

Don't want the constant pump noise

Ok so there isn't an risk as far as the card throwing up errors etc? Do you need feel there will be a significant noise reduction with this mod? I will attach to the motherboard to allow for better fans control as you suggested.

The primary reason for the mod is noise reduction. The Noctua NF-A12x25s PWM fans are almost silent and I want this rig to be super quiet.

Ok I have taken off all the screws and therefore are 4 connections on the GPU (1 for each fan and 1 attached to the case). 1) Will disconnecting all of these cause a problem? 2) Am I better attaching the 2 Noctua fans to the gpu or motherboard?

Hi All, Super excited this bad boy is being delivered tomorrow and my 3080 arrived yesterday along with all my other sff components. I could use some help please: 1) What is the ideal viewing distance to enjoy 4k gaming but to also make it effective for work (excel, outlook, etc)? I think it...

Hi All, Super excited this bad boy is being delivered tomorrow and I could use some help please: 1) What is the ideal viewing distance to enjoy 4k gaming but to also make it effective for work (excel, outlook, etc)? 2) What is the ideal height for the screen? Do I want my eyes looking...

Interesting read. I think if using all noctua fans and dehsriuding the gpu under 30db is quite doable.

Thanks and noted on the Evo and evo plus. The CX 48 is a lovely TV/monitor and its oled. It is gsync, fast response with a good refresh and has 4x usb2.1 ports. The only negative is 48 is very big and you need to sit 36 to 40inches away from it. Price point is good too considering its specs and...

Zipties can work nicely it seems. This isnt a 3080 but addresses hiw to ensure no gap between fans and the radiator. I just have to decide on exhaust vs intake for them.

Hi Neighbour, I can help you bag a 3080 at retail. Message me. I am going for a LG 48 CX if I am able to wall mount it. I hope. I managed to find a sf750 and went for it. The ram was £235 which didn't seem to bad. The Samsung evo 2tb on scan is £307 vs around £210 for the 1tb pro. I think I...

Hi All, As the title says, can you please advice on which fans are best for attaching to the GPU hestsink. Noise is the biggest priority with thermal performance being a close second. 2 x Noctua NF-A12x25 https://noctua.at/en/products/fan/nf-a12x25-pwm Or 2 x Noctua NF-F12 PWM...

I am in London, UK. The 750 is sold out everywhere. My use case is gaming (mostly fps and AAA titles when they come out) and Microsoft Office based work (multi window excel, huge volume of emails and searching through them, etc). I occasionally edit 4k drone and GoPro footage but not that...

Thank you for the thoughtful and helpful response. My thinking for the deshroud was to eliminate noise rather than better thermals. Do you think it would achieve better sound levels? I can't find the sf750 for some reason. Can you explain why it is more quiet than the sf600? I will look into...

Any idea what the failure rate is on gpus these days? I am tempted to take the risk and take a dremel to it

Case: Ncase M1 (Side Mesh Panels) CPU: 5900x GPU: 3080 EVGA XC3 Motherboard: Asus Rog Strix X570-I SILENT COOLING (Help Please): I like Noctua so I am thinking: GPU: 2 x NF-A12x25 for the deshroud gpu (intake?) CPU: NH-U95 with an extra fan (intake) for cpu Any other fans needed if there...

I just sniped one of these and its being delivered tomorrow :) EVGA XC3 285.37 111.15 2.2-slot Yes Confirmed by user I would love to go for a deshroud but it looks like a deshroud will be difficult. Any ideas? Please note this is not my case, I just found a deshroud attempt on this...

Hi All, I have an Ncase M1 and the 3080 Gigabyte OC I just hunted down is likely too big for it :( Would deshrouding get it to fit? Stock dimensions of the GPU: Card size L=320 W=129 H=55 mm Thanks

Fits nice and easy! 😁 EVGA XC3 285.37 111.15 2.2-slot Yes Confirmed by user Now this GPU has all three fans in exhaust. Can someone please advise: I would love to go for a deshroud unless I am better off just adding exhaust fans in the bottom of the case? I think deshroud would be ideal...

I am based in the UK so importing it would bring a boatload of tax. Pricing doesn't seem too bad though. It was always my understanding these designes were not cpu friendly but it looks interesting. I would like to better understand noise and thermal performance.

Guys can I get some advice on air cooling the M1. I am likely going with an AMD 5900x or 5950x and a 3080 or 6800xt. I did some research and the Noctua NH-U9S with a second fan seems good for the cooler. Anything better? Any advice on other fans and the best orientation? I was thinking cpu...

Anyone know if a pcie4 compatible version is coming soon?

Can anyone confirm if there are new incoming motherboards or cases to suit the new AMD CPUs and GPS? I am itching to pull the trigger on my new gear. I was going to go for the T1 but no pcie4 is a deal breaker. Is there a new version coming soon? Sliger console is looking quite cool. Ncase...

I too like the mesh side panels. Forgive my lack of knowledge but why can't he T1 support pcie 4? I am going with a 5900x and 6900xt most likely. I know amd boards support pcie4 but is that restricted in the T1?

The weight is over and I am finalising my equipmentist for my gaming and work (office) rig. I don't do much rendering other than my drone and gopro footage. Advise on the Motherboard and other remaining items would be much appreciated. Case: I am likely going with a T1 or NCase M1 CPU: AMD...