Search results

I figure go ahead and make a thread for this new printer. Kickstarter backers are starting to receive their CR 6 SE printers now. I ordered one. It hasn't shipped yet. Anyone else order one or plan to buy one once the Creality store starts selling them?

Just seen this: https://www.overclock3d.net/news/gpu_displays/acer_reveals_their_predator_43-inch_cg437kp_4k_144hz_displayhdr_1000_gaming_monitor/1?fbclid=IwAR28WBWt2csG2oSzlwflKzojF-_d2m4L9u8zODWNwRQnw_DVGlizMvFp9NQ

I know it sounds silly but I'm curious if any of our senior users here have tried this service. The AARP promotes Consumer Celluar as a low cost service. I'm just looking for input from someone other than AARP. Anyone use the service before?

So I been considering of getting a 4k tv for 4k gaming on pc. The KS model line is pretty decent for pc gaming @4k but now they are being phased out and replaced by the new MU model line. So my question is the MU line just as good as the older KS line? It's still 4k @ 60Hz I know that much. The...

I hope I'm asking in the right thread... anyway a 4790K cpu should be enough cpu power to run two GTX 1080Ti in SLI right? I'm thinking of moving up to 4k later this year and if I do I'll ditch my two 290x CF for 1080Ti SLI. I could do a cpu and mobo upgrade in addition to it but if I don't have...

Have you guys seen this case? I was surfing the net looking up ideas for a suitcase/briefcase type build I had in mind when I ran across this case. It doesnt have a lcd in the top but it is suit case like type case. I thought it interesting and figured maybe someone here may like to see it as...

So I recently got a Sapphire Tri-X OC video card. I'm contemplating building a new rig with two of these cards in it. I have a unused 4770K lying about so I'd use that and OC it. I'm thinking a 1000w psu would do the job but not sure. Never built anything as powerful as I'm contemplating so need...

I been looking for a 280x reference card since the day 280x released but it doesn't seem anyone is making them. They are all making non reference type with their own coolers. I really want the reference type that blows the air out the back for my smaller case. If anyone has links to 280x...

I just noticed Shuttle has a new bios out again. v110 Supposedly it fixes the smart fan issue that has plagued the SZ77R5 models running IB CPUs. I'm curious if anyone has this bios version and can confirm or deny that the fan issue has been fixed or not. Thanks in advance. :)

The 2500K cpu was/is considered by many to be the best price vs performance or as they say 'the sweet spot' in the SB family. Which IB cpu would be considered the best price vs performance. Would it be the 3570k? Or is it too early to know for sure yet?

Shuttle has listed their next line of SFF cubes. The SX79R5 and the SZ77R5. The SX79R5 is their mATX version and the SZ77R5 is their mITX version of the new chipset. Both units are housed in the same exact sized box. I never thought much of Shuttle PCs but it has a reputation of building solid...

The Lian-Li TU200 has released. Priced at $179. Here is the first review I have seen. http://www.anandtech.com/show/5006/lian-li-pctu200-on-the-road-with-lian-li Personally, I'm not impressed. It is overpriced IMO and the insides are pretty cramped. Seems to suffer cooling problems as...

SAMSUNG Spinpoint F3 HD103SJ 1TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive for $50. Offer ends 10/6 http://www.newegg.com/Product/Product.aspx?Item=N82E16822152185&nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Junction-_-na-_-na-_-na&AID=10440897&PID=3332167&SID=u00000687

With the rumors of the Silverstone ST45SF psu not being reliable due to some people experiencing problems going over 300w (chirping noise and shutdowns) I have started looking around the net for a possible replacement. I came across this SFX psu...

Hi Guys, I'm in the process of putting a build together and I want to use this slim drive. http://www.newegg.com/Product/Product.aspx?Item=N82E16827118058 Now finding this unit is not the problem. The problem I'm having is choosing the proper sata cable to use with it since its not...

They are out at NE now. Just ordered mine. http://www.newegg.com/Product/Product.aspx?Item=N82E16813131707

I have a new Corsair TX750w psu. Would the Corsair TX750w be enough to power two unlocked 6950 cards? The reason why I ask is because I have a HIS 2GB 6950 I want to use in a build and unlock it to 6970 and I am seriously considering adding a second one for CF. I would unlock it to a 6970 as...

So I was over at PerformancePCs site looking at cases when I ran across this case. http://www.aerocool.us/pgs/pgs-q/qx2000.htm I hadn't seen it before and it looked rather interesting in an odd sense so I had to check it out at their website. Its more for HTPC use than anything else...

I just ran across this case and hadn't seen it before. Just curious if anyone here had experiences with it. Here's a vid showing it off: http://www.viddler.com/explore/overclockershq/videos/87/ Case dimensions are 9" x 11.2" x 14.7" (H x W x D) Company website is http://www.bgears.com/...

Okay, I been contemplating getting a 5870 for a three 22" LCD Eyefinity set up. From my current research I know a regular 5870 will do the job more than adequately but now they have this new 2GB 5870. I understand its for a six monitor setup, which I have no intention of getting six monitors...

I already know through search that the 5870 will fit in a SG03 case. I'll have to remove the bottom 120mm fan and either leave it out or add a 120mm slim fan. I'm thinking I'll add the slim fan because some cooling intake is better than none. My question is to those that have added a 5870 to...

Someone over at AT posted this link. I guess it releases on the 18th. http://www.mwave.com/mwave/SKUSearch_v3.asp?px=FO&scriteria=BH00294 Here is Gigabyte's Info on it http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?ProductID=3308

http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID=3165 This mobo has been getting some attention around here recently and I thought maybe it was time to give it it's own thread so people can have an easier time of doing a search on it to get the info they need or...

So I been thinking of getting a notebook again. Its been years since I have had one. My thoughts are for the gaming side of me I want one with a 260m video card. I dont need more than that. I've seen some units that intrigue me at some fairly decent prices. What I'm trying to decide on though is...

Not sure if anyone here has seen this or not so I'll post it. If you have AVG 7.5 or 8.0 you may want to read it. http://www.dailytech.com/article.aspx?newsid=13407

Here's the build I'm doing now. Its nothing special or unique but its a good quality build. Its a medium price PC build for all practical purposes. Parts were ordered just before Thanksgiving and I'm just now finally getting the time to put it all together. SG03 Case 2 - 120mm Scythe S-Flex...

I'm looking for harness or a carrying strap for my new SG03 case. I know there is a SUGO case but I'm not wanting a case Just something like a harness or a strap for a quick attachment and go for short distances. Is anyone using something like this with their SG03? I know GearGrip makes some...

Something new for the AMD users http://www.pro-clockers.com/review.php?id=271

I dont know if people have seen this yet so I thought I'd post a link. Dogsx2 over at XS has a Thermalright 120 ultra in a Microfly case on a P5K-VM mobo. I found it interesting anyway. http://www.xtremesystems.org/forums/showthread.php?t=158106

"The H2gO was designed for the enthusiast on the go. Measuring up to 17 inches deep, 13.5 inches tall and 12.75 inches wide, makes this case highly portable without sacrificing in the cooling or technology departments. The case is like all Mountain Mod cases broken into 2 separate chambers. The...

I was thinking I would like to get something that plays audio books on a cd. I was also thinking it would be nice if it played MP3 songs. Now I know there are CD players galore out there and I know there are Mp3 players galore too like iPod, Zune, etc., but is there such a unit that has both cd...

A new mATX mobo I just saw. Not sure if its been posted yet so here goes. http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?CategoryID=1&TypeID=32&DetailID=805&DetailName=Feature&MenuID=44&LanID=9 Review http://www.pcstats.com/articleview.cfm?articleID=2147

http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NAME=AN-M2HD&fMTYPE=Socket+AM2

Anyone know where to find this mATX mobo? I noticed Gigabyte officially posted it on their website today. I dont know if its out yet or not but I'm looking around the net. Supposedly it uses the new P35 chipset like its bigger ATX brothers that just launched.

I had originally put this link in the 'Gaming mATX board FINALLY' thread but then thought it might be better to give it its own thread so later on people can do a search for it instead of reading through a 1300+ posts there. Ontop of that we could even add more links to reviews if more become...

I did a search and although they were talked about a little no one claimed to actually use them and since it was an old thread I thought I'd ask if anyone has used them and what their thoughts were? Thinking they'd be better than the Vantec Stealth 80mm fans for my Qmicra box.

Opinions? http://www.pcstats.com/articleview.cfm?articleID=2055

Looking for a LCD thats fairly easy to tote around (as far as LCDs go anyway). Shuttle has one that has a handle and a speacial base/stand for Lanparty use but it has two main problems. 1)Its only 17" and... 2) its $400. Thats more than many 20" models on the market. So I'm looking for something...

A question for those that use the Antec Super Lanboy and take them to Lan parties on a regular basis. I'm curious how big of a HSF is installed in your Super Lanboy case and if you have any problems transporting it(becoming loose or falling off). More specifically those that use the new Conroe...

Unfortunately they didnt use a Conroe chip. http://www.motherboards.org/reviews/motherboards/1674_1.html