Search results

  1. Nobu

    VIA EPIA 800 missing S-Video

    Any chance I could put it back in? I imagine it'd need an IC or two, and some resistors/caps that were also left out, but I'm not certain on that. Will have pics later on. The S-Vid connector itself is under the parallel port, at least one through-hole (the others are either pads or filled...
  2. Nobu

    486 Repair (or, my Ni/MH is leaking!)

    So I recently found again the Packard Bell my dad let me play with as a kid, and he let me have it. Concerned with the condition of the board (as it had already been losing the BIOS date/time and config when I was a kid), I opened it up, only to find this: Well, that and a lot of dust, a...
  3. Nobu

    Latest Fx Android Beta Hiding Soft Buttons

    The latest Firefox Beta for Android seems to be hiding the soft buttons (back, home, etc) as well as the notification bar when browsing [H]. I hadn't noticed this on an earlier version, but I thought maybe xenforo got updated and that (anti-)feature was added, and perhaps it was just...
  4. Nobu

    [DEAD] Ryzen 3600X $209.09 amazon

    3600X $209.09 on amazon. https://www.amazon.com/dp/B07SQBFN2D Just $40 off, but still a decent deal.
  5. Nobu

    USB-C Cable Arcing on Disconnect

    I have an Anker USB-C cable which is hooked up to my PC for charging/data transfer. I noticed that when I disconnect it, it arcs inside the cable's connector end several times (about 5 on average, in quick bursts). Is this normal/expected behavior?
  6. Nobu

    AMD InWin 301 Custom Loop

    This one could take a while, just due to the difficulty. Going to be stuffing an mATX motherboard and a 280mm res into the InWin 301, hopefully without any permanant modification to the case. So far, I've stripped out everything I can without cutting or drilling, including the front panel...
  7. Nobu

    Asus AM4 commercial (CSM) Boards

    Anybody have one? I'm curious about the extra features they have, especially ECC support (I assume unbuffered, but regardless...). Are there any particularly useful features which set them apart from their non-CSM boards? They aren't much more expensive, so I figure the hardware is basically...
  8. Nobu

    SFF Platform Reviews?

    Are there any websites/blogs posting reviews of itx systems? Looking for power-consumption specifically (AMD APU itx system power, for example), but I would be interested in reviews focused on other things as well (board layout, chipsets, etc). I'm aware of buildzoid, but can't watch his videos...
  9. Nobu

    [WIP] Antek ISK 300-150 AM4 Build

    Parts: MB: Asrock B450 Gaming-ITX/AC (shipping) CPU: 3400G (4000-series later, maybe) Cooler: Noctua NH-L9a-AM4 RAM: TBD (Likely TEAMGROUP E+ 2x4GB 2400 cl16) Storage: Corsair 128GB SATA SSD, to be upgraded later. So far I've got the case and CPU cooler. I've unpacked and disassembled the case...
  10. Nobu

    Any new boards in the pipes?

    Are there new boards coming down the pipes, or should I just bite the bullet? Really don't want to spend almost $200 on a b350/450, especially if 550 is around the corner. Lookin to do a sff build, but seems like everything is sold out or sold by a third party for 130%. Even the matx boards are...
  11. Nobu

    Hoover Spotless Ptbl Carpet Cleaner $69.99

    Smokin! Hoover Portable Carpet/upholstery cleaner On clearance at sears.com (sold by sears) for $69.99 Target price matched, but they don't have the deluxe model (which is what this looks like), ymmv and all that. Alright, so there are (at least) three models... Sears: FH11200 (blue) –...
  12. Nobu

    ESET NOD32 (5 PCs) $24.99 in cart Newegg

    ESET NOD32 2019 AV, $24.99 at the egg. Not super hot, but a pretty good deal if you have a few PCs to protect.
  13. Nobu

    AMD Announce Partnership w/ Samsung

    https://www.amd.com/en/press-releases/2019-06-03-amd-and-samsung-announce-strategic-partnership-ultra-low-power-high As part of the partnership, Samsung will license AMD graphics IP and will focus on advanced graphics technologies and solutions that are critical for enhancing innovation across...
  14. Nobu

    "ShadowHammer" malware found in Asus update, among others

    Kaspersky found malware being distributed by Asus update software with legitimate certificates, and says users of other vendors' software are also at risk, Forbes reports: The motivations for the malware attack are unclear, but it apparently targeted only 600 specific MAC addresses. Once found...
  15. Nobu

    [DEAD] LSI-9300-8i openbox $170 a/ tax+promo

    https://m.newegg.com/products/N82E16816118217R Exit: out of stock, but the code is still good for other items. OPENBX331THIRTY is the promo code (30% off ob), works on other openbox items too (I saw a supermicro epyc board, for instance, if you're interested).
  16. Nobu

    AsRock X399M Taichi [Toms Review]

    They said it couldn't be done. They said we were crazy. Well, here it is... An mATX X399 board: the X399M Taichi
  17. Nobu

    Epyc 7371 Announced

    Via AnandTech (though I first heard through newswire)
  18. Nobu

    AMD Q2 Financial Results, Earnings Call

    AMD released it's Q2 financial results, earnings call is beginning now at ir.amd.com Here's a short excerpt from the financial results: The rest is available at the above link.
  19. Nobu

    Ryzen / Epyc Embedded Launched

    https://globenewswire.com/news-release/2018/02/21/1372632/0/en/AMD-Launches-EPYC-Embedded-and-Ryzen-Embedded-Processors-for-End-to-End-Zen-Experiences-from-the-Core-to-the-Edge.html AMD launched their new ryzen embedded platform/chips
  20. Nobu

    Bclk, Cache Speed, L2 >= L1? (Ryzen)

    After updating to latest bios, I was trying different OC settings, and while testing for mem stability I saw this: L1 Cache: 58.67GB/s L2 Cache: 58.98GB/s Now, I know it was probably a fluke/error in the speed detection, but is it even possible for the L2 cache to be faster than the L1 cache...
  21. Nobu

    Xperia XA Nougat finally out...Not!

    Well, Sony finally released the Nougat update for the Xperia XA (and ultra) phones, then stopped distributing it soon after due to... "issues with the ota update" or something like that. Anyone lucky enough to get it before it disappeared?
  22. Nobu

    New imac: 5K Retina, Thunderbolt, Radeon Pro 500...

    I'm not a big apple fan, but I thought those who are would be interested to know: The new 21.5 & 27" imacs will have Radeon Pro 500 series graphics, along with a few other additions/changes.
  23. Nobu

    [Not Hot...] Corsair Ripjaw V 2x8GB 2800CAS16 $114

    Corsair Ripjaw V 2x8GB 2800 CAS16 $114 NVM, I read 3800, was 2800
  24. Nobu

    FS/FT: 2x8GB pc4-19200 ECC, A6-8570e (HP/AM4)

    I'm interested in trading for the following item(s): 16GB (2x8) PC4-19200 ECC RAM (single rank preferred, but dual rank is fine, any brand) I'm willing to trade the following for the above: Kingston ValueRAM 8GB PC4-2133 RDIMM KVR21R15S4/8 (x2, only used to test ryzen board, never oc'd) AM4...
  25. Nobu

    Gigabyte Aorus X370 Gaming K5

    Heyo, the Gaming K5 is now available on Amazon ("in stock on April 19th" last checked), I'd assume newegg too (haven't checked). Feel free to post your builds, bios woes, etc, for the K5 in this thread. :D Here's the driver/bios download page. Current BIOS available: (03/09/2017) F1, "Initial...
  26. Nobu

    EK-WB "Ryzen Week" Supremacy Evo on Sale $51-67

    Get'em while they're hot! ;) Prices from $51 to $67-ish. Edit: ordered mine on the 3rd, still no shipping notification (as of 3/8/17), so they must be going through a bit of volume. When I ordered my EK-Revo pump top a while back, it shipped out the next day.
  27. Nobu

    EK Waterblocks Confirming Compatibility [AM4]

    EK-WB posted this on their Facebook page a while ago: Click to view on Facebook
  28. Nobu

    EK-WB Black Friday Deals

    Don't see this on the first two pages, figured I should give you guys a heads-up. EK's doing a pretty big sale this week (I missed the first day :( ) Tue: Waterblocks Wed: Pumps, Reservoirs (Today) Thu: Fans, Radiators Fri: Doesn't say (everything?) Sat: Fittings Sun: Accessories Mon: "A...
  29. Nobu

    Hard Tube (Cu, Brass, etc) and Fittings Suggestions

    So I'm thinking about eventually putting together a loop using brass tubing and compression fittings (with ferrules), but being in the US, it's not exactly easy for someone not in the know to find 1/4" BSPP compression fittings that don't cost $8+ a piece. What are your recommendations for...
  30. Nobu

    Sidewinder Computers is on Amazon

    Apologies if this isn't really the best place for this, or if it's already well known, but... Sidewinder Computers apparently has a storefront on Amazon! The selection isn't huge, but I figured I'd post given the general lack of reputable shops stocking watercooling components (aside from...
  31. Nobu

    EK Revo D5 Pump Tops/Reservoirs

    Apparently EK released a new line of pump-top and reservoir/pump combos back in September. I ordered the EK-XTOP Revo D5 pump top because it looked more compact than the XSPC top I have currently and has a rubber isolator built in. It's not installed yet, but I think it looks pretty slick...
  32. Nobu

    Car LED Halos for Case Fans?

    So, I'm kinda disappointed in the lack of good static-pressure fans with LEDs, and I'm not convinced an LED strip placed around/behind my fans would look as good as integrated LEDs, nor would I like to drill holes in my fans. o_O So I was browsing around, saw these, and thought, "hmm, I...
  33. Nobu

    Making the jump from AIO, decision time--HAF XB EVO build

    So I'm ready to make the jump, got a radiator, cpu block, and fittings on their way. Now, I have a decision to make: Reservoir, or no reservoir? There's not a huge amount of space in the XB EVO, but I could fit a 240mm res/pump combo if I wanted to work for it. The alternatives are a smaller...
  34. Nobu

    Playing with Acrylics: CM XB EVO

    The XB EVO is a great looking case'n'all, but I thought it could use a little sprucing up. Still working out the hows and whats, but it looks like (once I get an idea of what, exactly, to paint) it'll work out well--as well as it could coming from an amateur anyway: A bit of Naphthol...
  35. Nobu

    First Intel Build, going [H]ard.

    Being as I just had the pleasure of obtaining (winning) a Z97 Sabertooth Mark S and STRIX GeForce 980 here at [H]ard|Forum, I figured it would be an injustice if I didn't at least attempt a build before selling either/or. ;) That said, I'm going to need some help picking out a case and power...
  36. Nobu

    WTB: Dynatron A24

    I'm interested in buying the following: Still want: • Dynatron a24 $40 shipped Got it: Ryzen 3000g/3200g/3400g A6-8570E PRO from Ebay, $35 A8-9600 $60 amaz Motorcycle Turntable (+14"), $50-60, price negotiable. Made my own. An Intel LGA 1150 Proc for $100-200. Bought from ebay A Full ATX...
  37. Nobu

    a78 vs a88x, 106 bclk wall?

    I have a Gigabyte F2A88XN-WIFI board, which can't go above 106 bclk without losing ahci (and I think my wifi disappears at about 111), so I was thinking about getting another motherboard. IDE isn't an option, because switching to IDE doesn't help for whatever reason, and I've got a SSD so...
  38. Nobu

    Internal USB 3.0 Hub

    Does anybody know of an internal USB hub that does not use a pcie slot? My mini-itx motherboard has only one 19pin USB 3.0 header, and the single pcie slot is occupied with a gpu; I would like to get a usb 3.0 card reader, but then I couldn't use the ports on the front of the case (unless I...
  39. Nobu

    VIA VB8001 Motherboard; available now?

    I found a site which appears to be selling the VB8001(-16). I don't know if they really have it, or if they're a reliable store to be buying from(I just found them in a search for "VB8001" in Google's "Product Search". Just thought I'd put this out there in case anyone's interested. If anyone...
  40. Nobu

    space between images in tables

    I've been working on my website for a while now and I can't seem to get rid of the space between the images in the tables in the div on the left. I've done it before, but it was before I switched to XHTML 1.1 and I can't quite get it working again. For the "Links" and "Outside Links" I could put...
Top