pendragon1
Extremely [H]
- Joined
- Oct 7, 2000
- Messages
- 52,196
i think so. i googles the dell p/n and it list a tonne of different models. no prob
![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
The [H]ardForum Perpetual Freebies Thread
- Thread starter crewzen
- Start date
Format _C:
2[H]4U
- Joined
- Jun 12, 2001
- Messages
- 3,885
Will a Xeon E3-1245 v2 SR0P9 work? I'm bidding on a lot of 9 on eBay I need two and I'll pass on the other 7 to [H] member if I win the auction!
Let me know if that will work?
I put a Xeon E3-1225 V2 in my HP 8300 Elite not officially supported but the motherboard sees it properly and it works fine this (if I win the auction) will replace that
Edit: I got outbid sorry
Last edited:
wiley_coyote
Limp Gawd
- Joined
- Jan 29, 2005
- Messages
- 199
2 x 4GB of 1600MHZ DDR3L SO-DIMMS these I can use.
As an eBay Associate, HardForum may earn from qualifying purchases.
nxcess
2[H]4U
- Joined
- Dec 22, 2004
- Messages
- 2,706
I tried an E3-1220v2. The board didn't like it. I ended up ordering an i5 from the previous post.
treefortrichard
Weaksauce
- Joined
- Jan 4, 2009
- Messages
- 124
Wife has been all over me to get rid of some stuff...let me check the pile...
treefortrichard
Weaksauce
- Joined
- Jan 4, 2009
- Messages
- 124
I'm not sure what socket you're looking for
I have an e8400 and e6600
But I'm pretty sure the e6600 (which was the beast at the time) is the same socket
Both were working when pulled.
https://ark.intel.com/content/www/u...sor-e8400-6m-cache-3-00-ghz-1333-mhz-fsb.html
https://ark.intel.com/content/www/u...sor-e6600-4m-cache-2-40-ghz-1066-mhz-fsb.html
I have a e7400. Was working when pulled. LMK if you want before I recycle it.
It would depend on the chipset of his motherboard. I believe that 9xx chipset works with e6600 but not E8400 as that would require the P3x/P4x series chipset.
jlbenedict
2[H]4U
- Joined
- May 22, 2005
- Messages
- 2,207
What happens if it goes the other way around
Why is it the husbands always gotta get rid of shit
gwarren007
Fully [H]
- Joined
- Apr 15, 2006
- Messages
- 20,912
Still need one? 945
Last edited:
Yeah, that'd be great.
Jelly
[H]ard|Gawd
- Joined
- Apr 15, 2009
- Messages
- 1,158
Free for someone in CONUS : A NIB (still sealed) roll of Inland PETG 2.85mm "Natural" (which is clear) Prob cost just as much to ship as it is new with shipping these days but i'll pay it forward!
I have 3570's. Want one?
staknhalo
Supreme [H]ardness
- Joined
- Jun 11, 2007
- Messages
- 6,924
My 3570K was running games fine till about 2018 I started getting CPU limited with a 2070 - Div 2 and Shadow of the Tomb Raid I couldn't get over 45FPS @ 1440p IIRC even reducing settings
Games less demanding than that or older should be fine on it still - Resident Evil 2/3 Remake and Hellblade ran fine on it though so it was right around then it became hit or miss but could still play some fine
Fortunately, the games played most in our house are Starcraft 2, Minecraft, TF2, and Kerbal Space Program, so I haven't been suffering terribly. Amazingly, the Windows 7 installation on that computer is probably 7-8 years old by now.
You get divorced.What happens if it goes the other way around
Why is it the husbands always gotta get rid of shit
It is not right that there is a double standard though. I ask my wife every time she says needs new clothes where she is going to put them because every closet is full of her clothes--mine don't even have room so I have like 5 shirts and 2 pants I'm constantly cycling through.
Wow, for that much if you search hard enough on ebay you should be able to just get a drive instead.
As an eBay Associate, HardForum may earn from qualifying purchases.
Oops, missed this. Thanks for the offer, but the board I needed the Pentium D for, maxes out at Pentium Ds, it doesn't take Core 2 parts. I would love to try a Pentium EE 840, which is the fastest CPU my board will take, but that's a bit much of an ask for the freebies thread.
I found an AGP HD4670 at work in the recycle pile (along with several other cards and motherboards) and the best motherboard I have that still has an AGP slot is this Gigabyte LGA775 board that only takes Pentium 4 or Pentium D CPUs.
If someone else can use it, I'll let them have it, as I'm awash in C2D CPUs at the moment. I'll be listing some stuff here soon when I can find time from work, been working 7 days a week heh.
If you're talking about the AGP card, I could use it for sure. I may have one of the Pentium Ds that you are looking for, but I think they're earmarked for system upgrades atm.
I'm not giving away the HD4670 lol. It's going into my collection of nice old hardware.
There were some other AGP cards in that pile of stuff I found that I'm going to give away, but they're much older and probably won't have any interest. The best is an AIW Radeon 9600, but it's missing the pigtail. I went back and dug in the recycling pile but I couldn't find it. The other cards are a couple of TNT and TNT2 M64 cards.
Gwarren07 hooked me up with a Pentium D 945 and an additional 930, which is nice.
Format _C:
2[H]4U
- Joined
- Jun 12, 2001
- Messages
- 3,885
I do have spare slim-line optical drives but this is actually for the Dell NR95F bay (I think they fit that also?) as I have it in my main PC (In sig not a Dell though) for a card reader and I don't want an unused optical drive sitting there (for looks I guess) as all 6 SATA ports are used with my 2 5.25" Blu-ray drives and 4 spinning disksWow, for that much if you search hard enough on ebay you should be able to just get a drive instead.
Yes I need to clean my case
I just want the piece of plastic where that slot loading DVD-Rom is for the looks like I said
Just encase someone is wonder the case is This
Attachments
As an eBay Associate, HardForum may earn from qualifying purchases.
As an Amazon Associate, HardForum may earn from qualifying purchases.
Good! It should be loved.
If it's working, somewhere out there can use it, so I'd post it up for sure.
Nice that someone hooked you up with the cpu you needed.
Took me a while to find mine as well.Gotcha, makes sense. I think you might be able to use a similar part number from other manufacturers as well, like Lenovo or HP that might be cheaper on ebay.
Another thing to consider is that slot-load drive is actually rare and a bit sought after since it was used in macbooks and those tend to be more expensive as a replacement part. Of course, no one uses discs anymore (or macbooks with discs) so meaning something is more in demand than 0 isn't saying much, lol.
As an eBay Associate, HardForum may earn from qualifying purchases.
As an Amazon Associate, HardForum may earn from qualifying purchases.
atwood7fan
Limp Gawd
- Joined
- Jul 20, 2006
- Messages
- 154
Have a few things for shipping cost from zip 28025:
- i3-2120 CPU from an Optiplex 3010. Worked fine when removed.
- AM4 motherboard from an Alienware Aurora. Model on the board is AMMTS-SH REEV A00. I think the board is bad, but I don't have the proprietary FP connector to test it, nor a CPU to test in it, so maybe you will get lucky?
2x Pebble Time smart watches. Both work, include chargers. They both have some scuffing on the metallic parts of the front, but also have screen protectors so the screens themselves are in good shape. Have been sitting in a drawer for probably 3 years so not sure what the battery is like, but they did work last I checked.- Droid mini smartphone. From the Verizon network. Probably 10 years old, but it works! No accessories.
Last edited:
staknhalo
Supreme [H]ardness
- Joined
- Jun 11, 2007
- Messages
- 6,924
Just post if claimed so others don't waste their time
I claimed it thanks.
Price of shipping (UPS ground) + $10 packing materials / food. Please message with your zip code + Paypal email for an invoice.
#1 HP EliteDesk 800 G1 USDT
I5-4570S
8GB
256GB SATA SSD
power brick (not pictured)
EDIT: Box is 18x13x5 10 lbs, shipping from 95209
#2 HP EliteDesk 800 G1 USDT
awful at unicycling = missing 1 rubber feet
I5-4590S
8GB
256GB SATA SSD
power brick (not pictured)
EDIT: Box is 18x13x5 10 lbs, shipping from 95209
#3 HP EliteDesk 800 G1 SFF
owed money to the mob = missing 1 rubber feet
I5-4670
8GB
256GB SATA SSD
EDIT: Box is 18x15x8 15 lbs, shipping from 95209
Last edited:
Hey, if it kept them safe, I would be all for it!I don't think pizza and burgers make good packing materials, but to each his own.
And the funny thing is if you look at the nutritional content of those they're just as bad as the ones that taste awesome.
New sealed
Best by 15 JAN 2023
Coffee is kinda nasty, but you can try it. Our family took a year to finish another pack of amzn french dark and I don't even want to open this variety pack. I am going back to SF OneCup.
FREE, I pay shipping. Shoot me you mailing address.
GONE to narsbars
Last edited:
I'm back to looking for a Pentium D 945 or 950. The one I got had charred and corroded pads on it and obviously was very dead.
Just to be sure, cleaned the crap out of the pads and removed the corrosion and scorch marks, yep still dead. Three different boards wouldn't boot with it installed.
Just to be sure, cleaned the crap out of the pads and removed the corrosion and scorch marks, yep still dead. Three different boards wouldn't boot with it installed.
gwarren007
Fully [H]
- Joined
- Apr 15, 2006
- Messages
- 20,912
I had to flash the bios to be able to use the 945 after using the 930. That's why I sent it. They were pulled from working systems awhile back.
probably was over volted by a few hundred million volts.
Definitely wasn't a BIOS issue. Chip went thermonuclear after just a few seconds and the board mosfets were very unhappy.
GA-8VM800PMD-775 - Pentium D 945 supported since BIOS F4, board had F6 installed.
GA-965P-DS3 - Pentium D 945 supported since BIOS F10, board had F14 installed.
GA-P35-DS3R - Pentium D 945 supported since BIOS F3, board had F13 installed.
The Pentium D 930 worked fine on all three boards. The 945 did nothing at first, after cleaning the charring off the pads, it just went thermonuclear. I suspect whatever the last board it was in did something nasty to it.
pendragon1
Extremely [H]
- Joined
- Oct 7, 2000
- Messages
- 52,196
did the chip i sent back in Apr. ever show up?