I have 4 drives connected to a Rocket 464 RAID Card. I tried to install Madriva and formatted the drives as such:
There are 4 drives, hdi, hdj, hdk, and hdl.
/boot hdi1 -ext3
swap hdi5
/ md0{hdi6 + hdj1 + hdk1 + hdl1} -Linux RAID (Level: 5, Block Size:64MB)
The Madriva install...
My DNS currently works, meaning that i have the ip address pointing to my boc, but I cannont get the mx to work (i am using gmail as my mail server), and getting errors like:
Getting MX record for mysite.com (from local DNS server, may be cached)... There is no MX record for mysite.com...
I have searched arounf everywhere and could even find a problem that was similar to mine. I have this box by powerspec that has a Micro Star MS6533G motherboard. The issue I am having is that the computer will not turning on all the time. When it boots normally I am able to hear the beep and the...
I was kind of nervous about the whole floppy thing myself but the person really wanted to install the software. Will the fixmbr and fixboot mess up the installation in anyway? I am not sure if it will get rid of GoBack. I will try it but only if it is safe.
Formatting the hard drive is absolute...
I tried to install a a wireless mouse using the floppy they gave me. The computer crashed.
When it restarted Norton GoBack gave a message saying the it has detected that the computer is unstable and it may be due to overclocking, memory or hard drive. When I get passed that the windows logo...
I currently have two computer one running Linux and the other running Windows. I am trying to get ssh port forwarding to work except that when I type ssh -L port:host1:port host2 the port forwarding goes trough only if the port is not being used by an application. I have a server application...
I have been having a problem with Active X. When I run windows update I get and error that says "Windows Update has encountered an error and cannot display the requested page. You may find the following resources helpful in resolving the problem:" [Error number: 0x80096010] . So I attepmted to...
I finally got it working. The power supply was the problem and I got that replaced and everthing is now working as it should. Thanks to all for the help. :D
My power supply is a coolmax ap-400x.
I am now wable to get the computer started with all the same parts but now have developed another problem. The display does not work. So I went out and got another video card but neither will display and I know the monitor works just fine because I...
My computer use to run all the time non stop. Then one day the computer froze and when I pushed the power button to turn it off and then back on it did nothing. The computer would not turn on. At times it would start for 2 secs then turn off. So from previous experiences there must be some part...
I have knoppix installed on my computer and I installed xfce4 and gdm. I made gdm my default login manager but how can I change the list for available sessions(graphical desktops) to include xfce4? Right now it has fluxbox, kde, etc. So I need to include xfce4.
I have bought many cds over the past few years and have recently finished copying the cds onto my computer. I also just finished building my media center and realized the way I organized my music files was not efficient because they are all in one folder sorted by <artist> - <song>. Does anyone...
Does any one where I can order a back issue of the MaximumPc issue that explains how to build a Media Center. I really want that issue because in it, they mention a couple of programs that I can interested in. One I remember was able to stream music from the server and they also explained how to...
I built a media center but I am having problem with getting it to display on the television. Originally I had an ATI All-in-Wonder 9000 and it displayed on the television without any problems. I upgraded to a 9800SE and now it is displaying in black and white and the resolution is not set...
I have an old system that I am turning into a server. I had put a new hard drive into the system and the computer has been having problems detecting it. When the bios tries to detect the hard drive it just sits there and says Detecting Secondary Device. So I went into the bios menu and told it...
Hello all,
I have been searching everywhere and have not found the information I am looking for.
I have configured send mail as a mail server and I and I have configured smtp so I can send mail remotely through my server.
I now am looking for a pop3 and imap server that I can configure to...
I cannot boot in safe mode it stops when it reaches "/"/drivers/Mip.sys.
I have a sata hdd so windows installer will not detect the drive with out the driver which requires loading it from a floppy disk.
I am in need of some help and fast. My Windows XP Pro computer will not start properly. It will not go past the windows screen (where the logo is on top and a progress bar is below it) the progress bar just keeps going and going and it will not bring up the login screen.
Is there anyway I can...
I would like to be able to connect to my FreeBSD server through windows command prompt. Windows alows the use of telnet but that is unsecure. I allows the use the use of ftp but I am limited to a certain commands. ssh is not supported by the command prompt so that option is out.
Does anyone...
Sorry but I was just taking old parts and trying to make a sytem from it.
I followed what you said and now it starts but it does not detect the cdrom or hdd. They are plugged in.
Can someone please tell me if the ASUS A7N266VM motherboard can work with an AMD Duron 750? If it is compatable are there any jumpers that I have to set?
I have setup my RedHat 9 server with a static ip address. I told my linksys router to forward the needed ports (80,22,21,etc) to the server. Is there anything that I have to configure on the server to say that the packets are coming from the router?
I tried to run redhat-config-xfree86 but same problem. Here is the XF96Config file.
# XFree86 4 configuration created by pyxf86config
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen 1" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"...
After tampering with it for a while did I realize I was suppose to setup the passwords. When I try the command "mysql_init_db" it says command not found.
I am running FreeBSD 5.1
Now I have been able to turn of the login is screen so I can do a text loging what can I change in the XF86Config file to lower the resolution so the monitor does not turn off on me?
Okay I got further in the process but now right after it shows:
login:
I think it trys to start the gui login the screen goes into standby. I think it may be because of the resoultion but my video card should support 1120x640.
Anyone have any suggestions?
My Computer specs are:
AMD Athlon 1.7ghz
256mb ram
IBM 120gb
ATI Raedon 7000
Biostar M7N8D *not sure about the model #*
After I installed Red Hat Enterprise it restarted. Then it began to start the OS. The first thing I noticed was that there was a message that said something like...